Air Traffic Controllers
53-2021.00

Control air traffic on and within vicinity of airport, and movement of air traffic between altitude sectors and control centers, according to established procedures and policies. Authorize, regulate, and control commercial airline flights according to government or company regulations to expedite and ensure flight safety.

Sample of reported job titles: Air Traffic Control Specialist (ATCS), Air Traffic Controller (ATC), Center Air Traffic Controller (Center ATC), Certified Professional Controller (CPC), Control Tower Operator, Enroute Air Traffic Controller (Enroute ATC), Radar Air Traffic Controller, Terminal Air Traffic Control Specialist (Terminal ATC Specialist), Tower Air Traffic Controller (Tower ATC)

Occupation-Specific Information

Tasks Save Table: XLSX CSV

ImportanceCategoryTask
97
 
Core
Inform pilots about nearby planes or potentially hazardous conditions, such as weather, speed and direction of wind, or visibility problems.
96
 
Core
Issue landing and take-off authorizations or instructions.
95
 
Core
Transfer control of departing flights to traffic control centers and accept control of arriving flights.
95
 
Core
Provide flight path changes or directions to emergency landing fields for pilots traveling in bad weather or in emergency situations.
95
 
Core
Alert airport emergency services in cases of emergency or when aircraft are experiencing difficulties.
94
 
Core
Monitor or direct the movement of aircraft within an assigned air space or on the ground at airports to minimize delays and maximize safety.
94
 
Core
Direct pilots to runways when space is available or direct them to maintain a traffic pattern until there is space for them to land.
94
 
Core
Monitor aircraft within a specific airspace, using radar, computer equipment, or visual references.
93
 
Core
Direct ground traffic, including taxiing aircraft, maintenance or baggage vehicles, or airport workers.
91
 
Core
Contact pilots by radio to provide meteorological, navigational, or other information.
89
 
Core
Maintain radio or telephone contact with adjacent control towers, terminal control units, or other area control centers to coordinate aircraft movement.
88
 
Core
Determine the timing or procedures for flight vector changes.
87
 
Core
Initiate or coordinate searches for missing aircraft.
87
 
Core
Provide on-the-job training to new air traffic controllers.
85
 
Core
Check conditions and traffic at different altitudes in response to pilots' requests for altitude changes.
84
 
Core
Relay air traffic information, such as courses, altitudes, or expected arrival times, to control centers.
82
 
Core
Inspect, adjust, or control radio equipment or airport lights.
81
 
Core
Compile information about flights from flight plans, pilot reports, radar, or observations.
81
 
Core
Organize flight plans or traffic management plans to prepare for planes about to enter assigned airspace.
70
 
Core
Review records or reports for clarity and completeness and maintain records or reports, as required under federal law.
64
 
Core
Complete daily activity reports and keep records of messages from aircraft.
80
 
Supplemental
Conduct pre-flight briefings on weather conditions, suggested routes, altitudes, indications of turbulence, or other flight safety information.
77
 
Supplemental
Analyze factors such as weather reports, fuel requirements, or maps to determine air routes.

back to top

Technology Skills Save Table: XLSX CSV

Hot technology
Hot Technologies are requirements most frequently included across all employer job postings.
In demand
In Demand skills are frequently included in employer job postings for this occupation.

back to top

Tools Used Save Table: XLSX CSV

  • Aircraft communication systems — Controller pilot datalink communication CPDC systems; High frequency HF radio communications systems; Ultra high frequency UHF radio communication systems; Very high frequency VHF radio communication systems
  • Aircraft flight simulators or trainers — Flight simulators
  • Aircraft guidance systems — Automatic direction finder ADF radio systems; Distance measuring equipment DME; Standard terminal automation replacement systems STARS; Wide area augmentation systems WAAS; 7 more
  • Aircraft navigation beacons — Nondirectional radio beacon markers
  • Binoculars
  • Desktop computers
  • Mainframe computers
  • Personal computers
  • Radarbased surveillance systems — Air route surveillance radar ARSR systems; Airport surface detection equipment ASDE systems; Mode S radar systems; Precision runway monitor PRM; 2 more
  • Two way radios — Frequency modulation FM two way radios

back to top

Occupational Requirements

Work Activities Save Table: XLSX CSV

ImportanceWork Activity
96
 
Making Decisions and Solving Problems — Analyzing information and evaluating results to choose the best solution and solve problems.
90
 
Identifying Objects, Actions, and Events — Identifying information by categorizing, estimating, recognizing differences or similarities, and detecting changes in circumstances or events.
89
 
Getting Information — Observing, receiving, and otherwise obtaining information from all relevant sources.
81
 
Monitoring Processes, Materials, or Surroundings — Monitoring and reviewing information from materials, events, or the environment, to detect or assess problems.
80
 
Communicating with Supervisors, Peers, or Subordinates — Providing information to supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person.
80
 
Processing Information — Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
78
 
Training and Teaching Others — Identifying the educational needs of others, developing formal educational or training programs or classes, and teaching or instructing others.
78
 
Updating and Using Relevant Knowledge — Keeping up-to-date technically and applying new knowledge to your job.
75
 
Analyzing Data or Information — Identifying the underlying principles, reasons, or facts of information by breaking down information or data into separate parts.
73
 
Evaluating Information to Determine Compliance with Standards — Using relevant information and individual judgment to determine whether events or processes comply with laws, regulations, or standards.
73
 
Organizing, Planning, and Prioritizing Work — Developing specific goals and plans to prioritize, organize, and accomplish your work.
73
 
Thinking Creatively — Developing, designing, or creating new applications, ideas, relationships, systems, or products, including artistic contributions.
66
 
Performing for or Working Directly with the Public — Performing for people or dealing directly with the public. This includes serving customers in restaurants and stores, and receiving clients or guests.
65
 
Coaching and Developing Others — Identifying the developmental needs of others and coaching, mentoring, or otherwise helping others to improve their knowledge or skills.
62
 
Working with Computers — Using computers and computer systems (including hardware and software) to program, write software, set up functions, enter data, or process information.
58
 
Documenting/Recording Information — Entering, transcribing, recording, storing, or maintaining information in written or electronic/magnetic form.
58
 
Estimating the Quantifiable Characteristics of Products, Events, or Information — Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.
55
 
Communicating with People Outside the Organization — Communicating with people outside the organization, representing the organization to customers, the public, government, and other external sources. This information can be exchanged in person, in writing, or by telephone or e-mail.
54
 
Interpreting the Meaning of Information for Others — Translating or explaining what information means and how it can be used.
53
 
Establishing and Maintaining Interpersonal Relationships — Developing constructive and cooperative working relationships with others, and maintaining them over time.
52
 
Developing Objectives and Strategies — Establishing long-range objectives and specifying the strategies and actions to achieve them.
49
 
Inspecting Equipment, Structures, or Materials — Inspecting equipment, structures, or materials to identify the cause of errors or other problems or defects.
47
 
Coordinating the Work and Activities of Others — Getting members of a group to work together to accomplish tasks.
44
 
Developing and Building Teams — Encouraging and building mutual trust, respect, and cooperation among team members.
44
 
Judging the Qualities of Objects, Services, or People — Assessing the value, importance, or quality of things or people.
42
 
Resolving Conflicts and Negotiating with Others — Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others.
38
 
Scheduling Work and Activities — Scheduling events, programs, and activities, as well as the work of others.
37
 
Guiding, Directing, and Motivating Subordinates — Providing guidance and direction to subordinates, including setting performance standards and monitoring performance.
36
 
Providing Consultation and Advice to Others — Providing guidance and expert advice to management or other groups on technical, systems-, or process-related topics.
33
 
Controlling Machines and Processes — Using either control mechanisms or direct physical activity to operate machines or processes (not including computers or vehicles).
30
 
Assisting and Caring for Others — Providing personal assistance, medical attention, emotional support, or other personal care to others such as coworkers, customers, or patients.
25
 
Performing Administrative Activities — Performing day-to-day administrative tasks such as maintaining information files and processing paperwork.
22
 
Monitoring and Controlling Resources — Monitoring and controlling resources and overseeing the spending of money.
19
 
Handling and Moving Objects — Using hands and arms in handling, installing, positioning, and moving materials, and manipulating things.
18
 
Staffing Organizational Units — Recruiting, interviewing, selecting, hiring, and promoting employees in an organization.
13
 
Drafting, Laying Out, and Specifying Technical Devices, Parts, and Equipment — Providing documentation, detailed instructions, drawings, or specifications to tell others about how devices, parts, equipment, or structures are to be fabricated, constructed, assembled, modified, maintained, or used.
13
 
Selling or Influencing Others — Convincing others to buy merchandise/goods or to otherwise change their minds or actions.
12
 
Performing General Physical Activities — Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling materials.
10
 
Repairing and Maintaining Electronic Equipment — Servicing, repairing, calibrating, regulating, fine-tuning, or testing machines, devices, and equipment that operate primarily on the basis of electrical or electronic (not mechanical) principles.
7
 
Operating Vehicles, Mechanized Devices, or Equipment — Running, maneuvering, navigating, or driving vehicles or mechanized equipment, such as forklifts, passenger vehicles, aircraft, or watercraft.
4
 
Repairing and Maintaining Mechanical Equipment — Servicing, repairing, adjusting, and testing machines, devices, moving parts, and equipment that operate primarily on the basis of mechanical (not electronic) principles.

back to top

Detailed Work Activities Save Table: XLSX CSV

back to top

Work Context Save Table: XLSX CSV

  • Frequency of Decision Making — How frequently is the worker required to make decisions that affect other people, the financial resources, and/or the image and reputation of the organization?
    • 96%
      96%
       
      responded: Every day
  • Indoors, Environmentally Controlled — How often does this job require working indoors in environmentally controlled conditions?
    • 97%
      97%
       
      responded: Every day
  • Impact of Decisions on Co-workers or Company Results — What results do your decisions usually have on other people or the image or reputation or financial resources of your employer?
    • 87%
      87%
       
      responded: Very important results
  • Importance of Being Exact or Accurate — How important is being very exact or highly accurate in performing this job?
    • 88%
      88%
       
      responded: Extremely important
  • Work With Work Group or Team — How important is it to work with others in a group or team in this job?
    • 83%
      83%
       
      responded: Extremely important
    • 16%
      16%
       
      responded: Very important
  • Contact With Others — How much does this job require the worker to be in contact with others (face-to-face, by telephone, or otherwise) in order to perform it?
    • 87%
      87%
       
      responded: Constant contact with others
  • Importance of Repeating Same Tasks — How important is repeating the same physical activities (e.g., key entry) or mental activities (e.g., checking entries in a ledger) over and over, without stopping, to performing this job?
    • 77%
      77%
       
      responded: Extremely important
    • 17%
      17%
       
      responded: Very important
  • Spend Time Sitting — How much does this job require sitting?
    • 60%
      60%
       
      responded: Continually or almost continually
    • 27%
      27%
       
      responded: More than half the time
  • Frequency of Conflict Situations — How often are there conflict situations the employee has to face in this job?
    • 65%
      65%
       
      responded: Every day
    • 18%
      18%
       
      responded: Once a week or more but not every day
  • Freedom to Make Decisions — How much decision making freedom, without supervision, does the job offer?
    • 59%
      59%
       
      responded: A lot of freedom
    • 21%
      21%
       
      responded: Some freedom
    • 11%
      11%
       
      responded: Limited freedom
  • Physical Proximity — To what extent does this job require the worker to perform job tasks in close physical proximity to other people?
    • 33%
      33%
       
      responded: Very close (near touching)
    • 62%
      62%
       
      responded: Moderately close (at arm's length)
  • Deal With External Customers — How important is it to work with external customers or the public in this job?
    • 70%
      70%
       
      responded: Extremely important
    • 11%
      11%
       
      responded: Not important at all
  • Consequence of Error — How serious would the result usually be if the worker made a mistake that was not readily correctable?
    • 76%
      76%
       
      responded: Extremely serious
    • 17%
      17%
       
      responded: Not serious at all
  • Coordinate or Lead Others — How important is it to coordinate or lead others in accomplishing work activities in this job?
    • 53%
      53%
       
      responded: Extremely important
    • 23%
      23%
       
      responded: Very important
    • 14%
      14%
       
      responded: Important
  • Spend Time Using Your Hands to Handle, Control, or Feel Objects, Tools, or Controls — How much does this job require using your hands to handle, control, or feel objects, tools or controls?
    • 63%
      63%
       
      responded: Continually or almost continually
    • 15%
      15%
       
      responded: More than half the time
    • 12%
      12%
       
      responded: Never
  • Face-to-Face Discussions — How often do you have to have face-to-face discussions with individuals or teams in this job?
    • 62%
      62%
       
      responded: Every day
    • 19%
      19%
       
      responded: Once a month or more but not every week
    • 16%
      16%
       
      responded: Once a year or more but not every month
  • Structured versus Unstructured Work — To what extent is this job structured for the worker, rather than allowing the worker to determine tasks, priorities, and goals?
    • 48%
      48%
       
      responded: A lot of freedom
    • 20%
      20%
       
      responded: Some freedom
    • 14%
      14%
       
      responded: Limited freedom
    • 13%
      13%
       
      responded: Very little freedom
  • Telephone — How often do you have telephone conversations in this job?
    • 62%
      62%
       
      responded: Every day
    • 22%
      22%
       
      responded: Never
  • Degree of Automation — How automated is the job?
    • 22%
      22%
       
      responded: Completely automated
    • 32%
      32%
       
      responded: Highly automated
    • 29%
      29%
       
      responded: Moderately automated
    • 16%
      16%
       
      responded: Slightly automated
  • Responsibility for Outcomes and Results — How responsible is the worker for work outcomes and results of other workers?
    • 33%
      33%
       
      responded: Very high responsibility
    • 15%
      15%
       
      responded: High responsibility
    • 26%
      26%
       
      responded: Moderate responsibility
    • 19%
      19%
       
      responded: Limited responsibility
  • Sounds, Noise Levels Are Distracting or Uncomfortable — How often does this job require working exposed to sounds and noise levels that are distracting or uncomfortable?
    • 29%
      29%
       
      responded: Every day
    • 30%
      30%
       
      responded: Once a week or more but not every day
    • 12%
      12%
       
      responded: Once a month or more but not every week
    • 18%
      18%
       
      responded: Once a year or more but not every month
  • Spend Time Making Repetitive Motions — How much does this job require making repetitive motions?
    • 30%
      30%
       
      responded: Continually or almost continually
    • 33%
      33%
       
      responded: More than half the time
    • 16%
      16%
       
      responded: Less than half the time
    • 13%
      13%
       
      responded: Never
  • Deal With Unpleasant or Angry People — How frequently does the worker have to deal with unpleasant, angry, or discourteous individuals as part of the job requirements?
    • 20%
      20%
       
      responded: Every day
    • 30%
      30%
       
      responded: Once a week or more but not every day
    • 30%
      30%
       
      responded: Once a month or more but not every week
    • 19%
      19%
       
      responded: Once a year or more but not every month
  • Time Pressure — How often does this job require the worker to meet strict deadlines?
    • 48%
      48%
       
      responded: Every day
    • 27%
      27%
       
      responded: Never
  • Letters and Memos — How often does the job require written letters and memos?
    • 30%
      30%
       
      responded: Every day
    • 21%
      21%
       
      responded: Once a week or more but not every day
    • 17%
      17%
       
      responded: Once a month or more but not every week
    • 15%
      15%
       
      responded: Once a year or more but not every month
    • 16%
      16%
       
      responded: Never
  • Duration of Typical Work Week — Number of hours typically worked in one week.
    • 12%
      12%
       
      responded: More than 40 hours
    • 88%
      88%
       
      responded: 40 hours
  • Level of Competition — To what extent does this job require the worker to compete or to be aware of competitive pressures?
    • 19%
      19%
       
      responded: Extremely competitive
    • 24%
      24%
       
      responded: Highly competitive
    • 23%
      23%
       
      responded: Moderately competitive
    • 13%
      13%
       
      responded: Slightly competitive
    • 21%
      21%
       
      responded: Not at all competitive
  • Electronic Mail — How often do you use electronic mail in this job?
    • 16%
      16%
       
      responded: Every day
    • 16%
      16%
       
      responded: Once a week or more but not every day
    • 16%
      16%
       
      responded: Once a month or more but not every week
    • 24%
      24%
       
      responded: Once a year or more but not every month
    • 28%
      28%
       
      responded: Never
  • Responsible for Others' Health and Safety — How much responsibility is there for the health and safety of others in this job?
    • 11%
      11%
       
      responded: Very high responsibility
    • 18%
      18%
       
      responded: High responsibility
    • 16%
      16%
       
      responded: Moderate responsibility
    • 32%
      32%
       
      responded: Limited responsibility
    • 23%
      23%
       
      responded: No responsibility
  • Extremely Bright or Inadequate Lighting — How often does this job require working in extremely bright or inadequate lighting conditions?
    • 29%
      29%
       
      responded: Every day
    • 11%
      11%
       
      responded: Once a year or more but not every month
    • 51%
      51%
       
      responded: Never
  • Pace Determined by Speed of Equipment — How important is it to this job that the pace is determined by the speed of equipment or machinery? (This does not refer to keeping busy at all times on this job.)
    • 22%
      22%
       
      responded: Extremely important
    • 11%
      11%
       
      responded: Fairly important
    • 57%
      57%
       
      responded: Not important at all
  • Spend Time Standing — How much does this job require standing?
    • 13%
      13%
       
      responded: About half the time
    • 63%
      63%
       
      responded: Less than half the time
    • 13%
      13%
       
      responded: Never
  • Exposed to Contaminants — How often does this job require working exposed to contaminants (such as pollutants, gases, dust or odors)?
    • 19%
      19%
       
      responded: Every day
    • 18%
      18%
       
      responded: Once a year or more but not every month
    • 54%
      54%
       
      responded: Never
  • Exposed to High Places — How often does this job require exposure to high places?
    • 25%
      25%
       
      responded: Every day
    • 72%
      72%
       
      responded: Never
  • Public Speaking — How often do you have to perform public speaking in this job?
    • 14%
      14%
       
      responded: Every day
    • 19%
      19%
       
      responded: Once a year or more but not every month
    • 61%
      61%
       
      responded: Never
  • Exposed to Radiation — How often does this job require exposure to radiation?
    • 16%
      16%
       
      responded: Every day
    • 81%
      81%
       
      responded: Never
  • Work Schedules — How regular are the work schedules for this job?
    • 25%
      25%
       
      responded: Irregular (changes with weather conditions, production demands, or contract duration)
    • 72%
      72%
       
      responded: Regular (established routine, set schedule)
  • Spend Time Walking and Running — How much does this job require walking and running?
    • 40%
      40%
       
      responded: Less than half the time
    • 55%
      55%
       
      responded: Never
  • Spend Time Bending or Twisting the Body — How much does this job require bending or twisting your body?
    • 22%
      22%
       
      responded: Less than half the time
    • 67%
      67%
       
      responded: Never
  • Very Hot or Cold Temperatures — How often does this job require working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures?
    • 20%
      20%
       
      responded: Once a year or more but not every month
    • 75%
      75%
       
      responded: Never
  • Deal With Physically Aggressive People — How frequently does this job require the worker to deal with physical aggression of violent individuals?
    • 19%
      19%
       
      responded: Once a year or more but not every month
    • 76%
      76%
       
      responded: Never
  • Cramped Work Space, Awkward Positions — How often does this job require working in cramped work spaces that requires getting into awkward positions?
    • 89%
      89%
       
      responded: Never
  • Exposed to Disease or Infections — How often does this job require exposure to disease/infections?
    • 88%
      88%
       
      responded: Never
  • Indoors, Not Environmentally Controlled — How often does this job require working indoors in non-controlled environmental conditions (e.g., warehouse without heat)?
    • 87%
      87%
       
      responded: Never
  • Spend Time Kneeling, Crouching, Stooping, or Crawling — How much does this job require kneeling, crouching, stooping or crawling?
    • 87%
      87%
       
      responded: Never
  • Exposed to Hazardous Equipment — How often does this job require exposure to hazardous equipment?
    • 91%
      91%
       
      responded: Never
  • In an Enclosed Vehicle or Equipment — How often does this job require working in a closed vehicle or equipment (e.g., car)?
    • 89%
      89%
       
      responded: Never
  • Exposed to Hazardous Conditions — How often does this job require exposure to hazardous conditions?
    • 94%
      94%
       
      responded: Never
  • Outdoors, Under Cover — How often does this job require working outdoors, under cover (e.g., structure with roof but no walls)?
    • 95%
      95%
       
      responded: Never
  • Spend Time Climbing Ladders, Scaffolds, or Poles — How much does this job require climbing ladders, scaffolds, or poles?
    • 93%
      93%
       
      responded: Never
  • Exposed to Minor Burns, Cuts, Bites, or Stings — How often does this job require exposure to minor burns, cuts, bites, or stings?
    • 97%
      97%
       
      responded: Never
  • Exposed to Whole Body Vibration — How often does this job require exposure to whole body vibration (e.g., operate a jackhammer)?
    • 97%
      97%
       
      responded: Never
  • In an Open Vehicle or Equipment — How often does this job require working in an open vehicle or equipment (e.g., tractor)?
    • 97%
      97%
       
      responded: Never
  • Outdoors, Exposed to Weather — How often does this job require working outdoors, exposed to all weather conditions?
    • 97%
      97%
       
      responded: Never
  • Spend Time Keeping or Regaining Balance — How much does this job require keeping or regaining your balance?
    • 97%
      97%
       
      responded: Never
  • Wear Common Protective or Safety Equipment such as Safety Shoes, Glasses, Gloves, Hearing Protection, Hard Hats, or Life Jackets — How much does this job require wearing common protective or safety equipment such as safety shoes, glasses, gloves, hard hats or life jackets?
    • 97%
      97%
       
      responded: Never
  • Wear Specialized Protective or Safety Equipment such as Breathing Apparatus, Safety Harness, Full Protection Suits, or Radiation Protection — How much does this job require wearing specialized protective or safety equipment such as breathing apparatus, safety harness, full protection suits, or radiation protection?
    • 97%
      97%
       
      responded: Never

back to top

Experience Requirements

Job Zone Save Table: XLSX CSV

Title
Job Zone Three: Medium Preparation Needed
Education
Most occupations in this zone require training in vocational schools, related on-the-job experience, or an associate's degree.
Related Experience
Previous work-related skill, knowledge, or experience is required for these occupations. For example, an electrician must have completed three or four years of apprenticeship or several years of vocational training, and often must have passed a licensing exam, in order to perform the job.
Job Training
Employees in these occupations usually need one or two years of training involving both on-the-job experience and informal training with experienced workers. A recognized apprenticeship program may be associated with these occupations.
Job Zone Examples
These occupations usually involve using communication and organizational skills to coordinate, supervise, manage, or train others to accomplish goals. Examples include hydroelectric production managers, desktop publishers, electricians, agricultural technicians, barbers, court reporters and simultaneous captioners, and medical assistants.
SVP Range
(6.0 to < 7.0)

back to top

Training & Credentials

State training
Local training
Certifications
State licenses

back to top

Apprenticeship Opportunities

Example apprenticeship titles for this occupation:

  • Air Traffic Controller

Specific title(s) listed above are vetted by industry and approved by the U.S. Department of Labor for use in a Registered Apprenticeship Program.

Start your career and build your skillset. Visit Apprenticeship.gov external site to learn about opportunities related to this occupation.

back to top

Worker Requirements

Skills Save Table: XLSX CSV

ImportanceSkill
85
 
Active Listening — Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
81
 
Speaking — Talking to others to convey information effectively.
78
 
Critical Thinking — Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems.
78
 
Judgment and Decision Making — Considering the relative costs and benefits of potential actions to choose the most appropriate one.
75
 
Complex Problem Solving — Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.
75
 
Monitoring — Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action.
72
 
Coordination — Adjusting actions in relation to others' actions.
69
 
Active Learning — Understanding the implications of new information for both current and future problem-solving and decision-making.
69
 
Reading Comprehension — Understanding written sentences and paragraphs in work-related documents.
63
 
Time Management — Managing one's own time and the time of others.
60
 
Social Perceptiveness — Being aware of others' reactions and understanding why they react as they do.
56
 
Operations Monitoring — Watching gauges, dials, or other indicators to make sure a machine is working properly.
56
 
Systems Analysis — Determining how a system should work and how changes in conditions, operations, and the environment will affect outcomes.
53
 
Instructing — Teaching others how to do something.
53
 
Learning Strategies — Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things.
53
 
Service Orientation — Actively looking for ways to help people.
53
 
Systems Evaluation — Identifying measures or indicators of system performance and the actions needed to improve or correct performance, relative to the goals of the system.
53
 
Writing — Communicating effectively in writing as appropriate for the needs of the audience.
47
 
Management of Personnel Resources — Motivating, developing, and directing people as they work, identifying the best people for the job.
47
 
Mathematics — Using mathematics to solve problems.
47
 
Persuasion — Persuading others to change their minds or behavior.
44
 
Operations Analysis — Analyzing needs and product requirements to create a design.
44
 
Quality Control Analysis — Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
41
 
Negotiation — Bringing others together and trying to reconcile differences.
38
 
Operation and Control — Controlling operations of equipment or systems.
25
 
Troubleshooting — Determining causes of operating errors and deciding what to do about it.
19
 
Management of Financial Resources — Determining how money will be spent to get the work done, and accounting for these expenditures.
19
 
Management of Material Resources — Obtaining and seeing to the appropriate use of equipment, facilities, and materials needed to do certain work.
19
 
Programming — Writing computer programs for various purposes.
19
 
Science — Using scientific rules and methods to solve problems.
19
 
Technology Design — Generating or adapting equipment and technology to serve user needs.
6
 
Equipment Maintenance — Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.
6
 
Equipment Selection — Determining the kind of tools and equipment needed to do a job.
3
 
Repairing — Repairing machines or systems using the needed tools.
0
 
Installation — Installing equipment, machines, wiring, or programs to meet specifications.

back to top

Knowledge Save Table: XLSX CSV

ImportanceKnowledge
80
 
Transportation — Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.
73
 
English Language — Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.
69
 
Education and Training — Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.
69
 
Public Safety and Security — Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.
65
 
Customer and Personal Service — Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.
62
 
Geography — Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.
61
 
Telecommunications — Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.
57
 
Mathematics — Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
50
 
Computers and Electronics — Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.
45
 
Law and Government — Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.
39
 
Administration and Management — Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.
39
 
Psychology — Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.
37
 
Communications and Media — Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.
35
 
Physics — Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.
32
 
Personnel and Human Resources — Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.
30
 
Administrative — Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.
28
 
Engineering and Technology — Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.
25
 
Production and Processing — Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.
23
 
Design — Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.
16
 
Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
13
 
Therapy and Counseling — Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.
12
 
Economics and Accounting — Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.
10
 
Sociology and Anthropology — Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.
9
 
Philosophy and Theology — Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.
7
 
Foreign Language — Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.
6
 
History and Archeology — Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.
5
 
Chemistry — Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.
5
 
Medicine and Dentistry — Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.
5
 
Sales and Marketing — Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.
4
 
Building and Construction — Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.
4
 
Fine Arts — Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.
3
 
Biology — Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.
0
 
Food Production — Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.

back to top

Education

How much education does a new hire need to perform a job in this occupation? Respondents said:

  • 36%
     
    responded: High school diploma or equivalent requiredmore info
  • 21%
     
    responded: Post-secondary certificate required
  • 20%
     
    responded: Bachelor’s degree required

back to top

Worker Characteristics

Abilities Save Table: XLSX CSV

ImportanceAbility
94
 
Problem Sensitivity — The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing that there is a problem.
91
 
Oral Comprehension — The ability to listen to and understand information and ideas presented through spoken words and sentences.
91
 
Oral Expression — The ability to communicate information and ideas in speaking so others will understand.
88
 
Selective Attention — The ability to concentrate on a task over a period of time without being distracted.
85
 
Deductive Reasoning — The ability to apply general rules to specific problems to produce answers that make sense.
81
 
Flexibility of Closure — The ability to identify or detect a known pattern (a figure, object, word, or sound) that is hidden in other distracting material.
81
 
Inductive Reasoning — The ability to combine pieces of information to form general rules or conclusions (includes finding a relationship among seemingly unrelated events).
81
 
Speed of Closure — The ability to quickly make sense of, combine, and organize information into meaningful patterns.
78
 
Far Vision — The ability to see details at a distance.
78
 
Near Vision — The ability to see details at close range (within a few feet of the observer).
78
 
Perceptual Speed — The ability to quickly and accurately compare similarities and differences among sets of letters, numbers, objects, pictures, or patterns. The things to be compared may be presented at the same time or one after the other. This ability also includes comparing a presented object with a remembered object.
78
 
Speech Clarity — The ability to speak clearly so others can understand you.
78
 
Time Sharing — The ability to shift back and forth between two or more activities or sources of information (such as speech, sounds, touch, or other sources).
75
 
Information Ordering — The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
75
 
Speech Recognition — The ability to identify and understand the speech of another person.
72
 
Written Comprehension — The ability to read and understand information and ideas presented in writing.
66
 
Category Flexibility — The ability to generate or use different sets of rules for combining or grouping things in different ways.
63
 
Auditory Attention — The ability to focus on a single source of sound in the presence of other distracting sounds.
63
 
Visualization — The ability to imagine how something will look after it is moved around or when its parts are moved or rearranged.
60
 
Fluency of Ideas — The ability to come up with a number of ideas about a topic (the number of ideas is important, not their quality, correctness, or creativity).
60
 
Originality — The ability to come up with unusual or clever ideas about a given topic or situation, or to develop creative ways to solve a problem.
60
 
Written Expression — The ability to communicate information and ideas in writing so others will understand.
53
 
Mathematical Reasoning — The ability to choose the right mathematical methods or formulas to solve a problem.
50
 
Memorization — The ability to remember information such as words, numbers, pictures, and procedures.
50
 
Number Facility — The ability to add, subtract, multiply, or divide quickly and correctly.
50
 
Visual Color Discrimination — The ability to match or detect differences between colors, including shades of color and brightness.
47
 
Control Precision — The ability to quickly and repeatedly adjust the controls of a machine or a vehicle to exact positions.
47
 
Finger Dexterity — The ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects.
47
 
Hearing Sensitivity — The ability to detect or tell the differences between sounds that vary in pitch and loudness.
41
 
Depth Perception — The ability to judge which of several objects is closer or farther away from you, or to judge the distance between you and an object.
38
 
Arm-Hand Steadiness — The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
35
 
Manual Dexterity — The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
28
 
Glare Sensitivity — The ability to see objects in the presence of a glare or bright lighting.
28
 
Night Vision — The ability to see under low-light conditions.
22
 
Spatial Orientation — The ability to know your location in relation to the environment or to know where other objects are in relation to you.
19
 
Reaction Time — The ability to quickly respond (with the hand, finger, or foot) to a signal (sound, light, picture) when it appears.
19
 
Sound Localization — The ability to tell the direction from which a sound originated.
19
 
Trunk Strength — The ability to use your abdominal and lower back muscles to support part of the body repeatedly or continuously over time without "giving out" or fatiguing.
16
 
Peripheral Vision — The ability to see objects or movement of objects to one's side when the eyes are looking ahead.
16
 
Response Orientation — The ability to choose quickly between two or more movements in response to two or more different signals (lights, sounds, pictures). It includes the speed with which the correct response is started with the hand, foot, or other body part.
13
 
Rate Control — The ability to time your movements or the movement of a piece of equipment in anticipation of changes in the speed and/or direction of a moving object or scene.
10
 
Multilimb Coordination — The ability to coordinate two or more limbs (for example, two arms, two legs, or one leg and one arm) while sitting, standing, or lying down. It does not involve performing the activities while the whole body is in motion.
3
 
Extent Flexibility — The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
3
 
Wrist-Finger Speed — The ability to make fast, simple, repeated movements of the fingers, hands, and wrists.
0
 
Dynamic Flexibility — The ability to quickly and repeatedly bend, stretch, twist, or reach out with your body, arms, and/or legs.
0
 
Dynamic Strength — The ability to exert muscle force repeatedly or continuously over time. This involves muscular endurance and resistance to muscle fatigue.
0
 
Explosive Strength — The ability to use short bursts of muscle force to propel oneself (as in jumping or sprinting), or to throw an object.
0
 
Gross Body Coordination — The ability to coordinate the movement of your arms, legs, and torso together when the whole body is in motion.
0
 
Gross Body Equilibrium — The ability to keep or regain your body balance or stay upright when in an unstable position.
0
 
Speed of Limb Movement — The ability to quickly move the arms and legs.
0
 
Stamina — The ability to exert yourself physically over long periods of time without getting winded or out of breath.
0
 
Static Strength — The ability to exert maximum muscle force to lift, push, pull, or carry objects.

back to top

Interests Save Table: XLSX CSV

Occupational InterestInterest
64
 
Conventional — Work involves following procedures and regulations to organize information or data, typically in a business setting. Conventional occupations are often associated with office work, accounting, mathematics/statistics, information technology, finance, or human resources.
62
 
Realistic — Work involves designing, building, or repairing of equipment, materials, or structures, engaging in physical activity, or working outdoors. Realistic occupations are often associated with engineering, mechanics and electronics, construction, woodworking, transportation, machine operation, agriculture, animal services, physical or manual labor, athletics, or protective services.
54
 
Enterprising — Work involves managing, negotiating, marketing, or selling, typically in a business setting, or leading or advising people in political and legal situations. Enterprising occupations are often associated with business initiatives, sales, marketing/advertising, finance, management/administration, professional advising, public speaking, politics, or law.
27
 
Social — Work involves helping, teaching, advising, assisting, or providing service to others. Social occupations are often associated with social, health care, personal service, teaching/education, or religious activities.
26
 
Investigative — Work involves studying and researching non-living objects, living organisms, disease or other forms of impairment, or human behavior. Investigative occupations are often associated with physical, life, medical, or social sciences, and can be found in the fields of humanities, mathematics/statistics, information technology, or health care service.
0
 
Artistic — Work involves creating original visual artwork, performances, written works, food, or music for a variety of media, or applying artistic principles to the design of various objects and materials. Artistic occupations are often associated with visual arts, applied arts and design, performing arts, music, creative writing, media, or culinary art.

back to top

Work Values Save Table: XLSX CSV

ExtentWork Value
83
 
Support — Occupations that satisfy this work value offer supportive management that stands behind employees. Corresponding needs are Company Policies, Supervision: Human Relations and Supervision: Technical.
72
 
Independence — Occupations that satisfy this work value allow employees to work on their own and make decisions. Corresponding needs are Creativity, Responsibility and Autonomy.
72
 
Working Conditions — Occupations that satisfy this work value offer job security and good working conditions. Corresponding needs are Activity, Compensation, Independence, Security, Variety and Working Conditions.
67
 
Achievement — Occupations that satisfy this work value are results oriented and allow employees to use their strongest abilities, giving them a feeling of accomplishment. Corresponding needs are Ability Utilization and Achievement.
67
 
Recognition — Occupations that satisfy this work value offer advancement, potential for leadership, and are often considered prestigious. Corresponding needs are Advancement, Authority, Recognition and Social Status.
39
 
Relationships — Occupations that satisfy this work value allow employees to provide service to others and work with co-workers in a friendly non-competitive environment. Corresponding needs are Co-workers, Moral Values and Social Service.

back to top

Work Styles Save Table: XLSX CSV

ImportanceWork Style
91
 
Attention to Detail — Job requires being careful about detail and thorough in completing work tasks.
91
 
Stress Tolerance — Job requires accepting criticism and dealing calmly and effectively with high-stress situations.
86
 
Dependability — Job requires being reliable, responsible, and dependable, and fulfilling obligations.
85
 
Adaptability/Flexibility — Job requires being open to change (positive or negative) and to considerable variety in the workplace.
84
 
Persistence — Job requires persistence in the face of obstacles.
82
 
Achievement/Effort — Job requires establishing and maintaining personally challenging achievement goals and exerting effort toward mastering tasks.
82
 
Analytical Thinking — Job requires analyzing information and using logic to address work-related issues and problems.
82
 
Self-Control — Job requires maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior, even in very difficult situations.
79
 
Cooperation — Job requires being pleasant with others on the job and displaying a good-natured, cooperative attitude.
78
 
Initiative — Job requires a willingness to take on responsibilities and challenges.
78
 
Integrity — Job requires being honest and ethical.
69
 
Independence — Job requires developing one's own ways of doing things, guiding oneself with little or no supervision, and depending on oneself to get things done.
69
 
Leadership — Job requires a willingness to lead, take charge, and offer opinions and direction.
66
 
Concern for Others — Job requires being sensitive to others' needs and feelings and being understanding and helpful on the job.
60
 
Innovation — Job requires creativity and alternative thinking to develop new ideas for and answers to work-related problems.
54
 
Social Orientation — Job requires preferring to work with others rather than alone, and being personally connected with others on the job.

back to top

Workforce Characteristics

Wages & Employment Trends

Median wages (2023)
$66.05 hourly, $137,380 annual
State wages
Local wages
Employment (2022)
23,000 employees
Projected growth (2022-2032)
Little or no change
Projected job openings (2022-2032)
2,000
State trends
Top industries (2022)
Government (92% employed in this sector)

Source: Bureau of Labor Statistics 2023 wage data external site and 2022-2032 employment projections external site. “Projected growth” represents the estimated change in total employment over the projections period (2022-2032). “Projected job openings” represent openings due to growth and replacement.

back to top

Job Openings on the Web

State job openings
Local job openings

back to top

More Information

back to top

Professional Associations

Disclaimer: Sources are listed to provide additional information on related jobs, specialties, and/or industries. Links to non-DOL Internet sites are provided for your convenience and do not constitute an endorsement.

National Associations
Accreditation, Certification, & Unions

back to top