- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
Occupations with related tasks Save Table: XLSX CSV
Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
1 | 2 | 1 | 47-3014.00 | Helpers--Painters, Paperhangers, Plasterers, and Stucco Masons |
1 | 1 | 2 | 51-4052.00 | Pourers and Casters, Metal |
1 | 1 | 2 | 51-9191.00 | Adhesive Bonding Machine Operators and Tenders |
1 | 1 | 2 | 51-2022.00 | Electrical and Electronic Equipment Assemblers
|
1 | 1 | 2 | 51-3093.00 | Food Cooking Machine Operators and Tenders |
1 | 1 | 1 | 51-9031.00 | Cutters and Trimmers, Hand |
1 | 1 | 2 | 51-9051.00 | Furnace, Kiln, Oven, Drier, and Kettle Operators and Tenders |
1 | 1 | 2 | 51-9022.00 | Grinding and Polishing Workers, Hand |
1 | 1 | 2 | 51-3091.00 | Food and Tobacco Roasting, Baking, and Drying Machine Operators and Tenders |
1 | 1 | 2 | 51-9023.00 | Mixing and Blending Machine Setters, Operators, and Tenders |
1 | 1 | 3 | 51-8011.00 | Nuclear Power Reactor Operators |
1 | 1 | 2 | 51-6091.00 | Extruding and Forming Machine Setters, Operators, and Tenders, Synthetic and Glass Fibers |
1 | 1 | 2 | 51-9021.00 | Crushing, Grinding, and Polishing Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 51-9141.00 | Semiconductor Processing Technicians
|
1 | 1 | 2 | 51-3092.00 | Food Batchmakers
|
1 | 1 | 2 | 51-9032.00 | Cutting and Slicing Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 51-9041.00 | Extruding, Forming, Pressing, and Compacting Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 51-4122.00 | Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
- Remove articles such as cabinets, metal furniture, and paint containers from stripping tanks after prescribed periods of time.
- Mix plaster, and carry plaster to plasterers.
- Clean work areas and equipment.
- Perform support duties to assist painters, paperhangers, plasterers, or masons.
- Apply protective coverings, such as masking tape, to articles or areas that could be damaged or stained by work processes.
- Erect scaffolding.
- Fill cracks or breaks in surfaces of plaster articles or areas with putty or epoxy compounds.
- Supply or hold tools and materials.
- Smooth surfaces of articles to be painted, using sanding and buffing tools and equipment.
- Place articles to be stripped into stripping tanks.
- Pour specified amounts of chemical solutions into stripping tanks.
- Remove articles such as cabinets, metal furniture, and paint containers from stripping tanks after prescribed periods of time.
- Mix plaster, and carry plaster to plasterers.
- Transport metal ingots to storage areas, using forklifts.
- Examine molds to ensure they are clean, smooth, and properly coated.
- Pour and regulate the flow of molten metal into molds and forms to produce ingots or other castings, using ladles or hand-controlled mechanisms.
- Pull levers to lift ladle stoppers and to allow molten steel to flow into ingot molds to specified heights.
- Read temperature gauges and observe color changes, adjusting furnace flames, torches, or electrical heating units as necessary to melt metal to specifications.
- Collect samples, or signal workers to sample metal for analysis.
- Load specified amounts of metal and flux into furnaces or clay crucibles.
- Add metal to molds to compensate for shrinkage.
- Skim slag or remove excess metal from ingots or equipment, using hand tools, strainers, rakes, or burners, collecting scrap for recycling.
- Remove metal ingots or cores from molds, using hand tools, cranes, and chain hoists.
- Position equipment such as ladles, grinding wheels, pouring nozzles, or crucibles, or signal other workers to position equipment.
- Repair and maintain metal forms and equipment, using hand tools, sledges, and bars.
- Turn valves to circulate water through cores, or spray water on filled molds to cool and solidify metal.
- Stencil identifying information on ingots and pigs, using special hand tools.
- Assemble and embed cores in casting frames, using hand tools and equipment.
- Remove solidified steel or slag from pouring nozzles, using long bars or oxygen burners.
- Transport metal ingots to storage areas, using forklifts.
- Transport materials, supplies, and finished products between storage and work areas, using forklifts.
- Align and position materials being joined to ensure accurate application of adhesive or heat sealing.
- Adjust machine components according to specifications such as widths, lengths, and thickness of materials and amounts of glue, cement, or adhesive required.
- Monitor machine operations to detect malfunctions and report or resolve problems.
- Start machines, and turn valves or move controls to feed, admit, apply, or transfer materials and adhesives, and to adjust temperature, pressure, and time settings.
- Fill machines with glue, cement, or adhesives.
- Perform test production runs and make adjustments as necessary to ensure that completed products meet standards and specifications.
- Examine and measure completed materials or products to verify conformance to specifications, using measuring devices such as tape measures, gauges, or calipers.
- Read work orders and communicate with coworkers to determine machine and equipment settings and adjustments and supply and product specifications.
- Remove and stack completed materials or products, and restock materials to be joined.
- Observe gauges, meters, and control panels to obtain information about equipment temperatures and pressures, or the speed of feeders or conveyors.
- Maintain production records such as quantities, dimensions, and thicknesses of materials processed.
- Remove jammed materials from machines and readjust components as necessary to resume normal operations.
- Mount or load material such as paper, plastic, wood, or rubber in feeding mechanisms of cementing or gluing machines.
- Clean and maintain gluing and cementing machines, using solutions, lubricants, brushes, and scrapers.
- Measure and mix ingredients to prepare glue.
- Depress pedals to lower electrodes that heat and seal edges of material.
- Transport materials, supplies, and finished products between storage and work areas, using forklifts.
- Pack finished assemblies for shipment, and transport them to storage areas, using hoists or handtrucks.
- Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions.
- Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.
- Adjust, repair, or replace electrical or electronic components to correct defects and to ensure conformance to specifications.
- Position, align, or adjust workpieces or electrical parts to facilitate wiring or assembly.
- Explain assembly procedures or techniques to other workers.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments.
- Fabricate or form parts, coils, or structures according to specifications, using drills, calipers, cutters, or saws.
- Confer with supervisors or engineers to plan or review work activities or to resolve production problems.
- Inspect or test wiring installations, assemblies, or circuits for resistance factors or for operation, and record results.
- Mark and tag components so that stock inventory can be tracked and identified.
- Measure and adjust voltages to specified values to determine operational accuracy of instruments.
- Complete, review, or maintain production, time, or component waste reports.
- Distribute materials, supplies, or subassemblies to work areas.
- Instruct customers in the installation, repair, or maintenance of products.
- Paint structures as specified, using paint sprayers.
- Pack finished assemblies for shipment, and transport them to storage areas, using hoists or handtrucks.
- Place products on conveyors or carts, and monitor product flow.
- Clean, wash, and sterilize equipment and cooking area, using water hoses, cleaning or sterilizing solutions, or rinses.
- Read work orders, recipes, or formulas to determine cooking times and temperatures, and ingredient specifications.
- Observe gauges, dials, and product characteristics, and adjust controls to maintain appropriate temperature, pressure, and flow of ingredients.
- Measure or weigh ingredients, using scales or measuring containers.
- Tend or operate and control equipment, such as kettles, cookers, vats and tanks, and boilers, to cook ingredients or prepare products for further processing.
- Record production and test data, such as processing steps, temperature and steam readings, cooking time, batches processed, and test results.
- Set temperature, pressure, and time controls, and start conveyers, machines, or pumps.
- Remove cooked material or products from equipment.
- Collect and examine product samples during production to test them for quality, color, content, consistency, viscosity, acidity, or specific gravity.
- Pour, dump, or load prescribed quantities of ingredients or products into cooking equipment, manually or using a hoist.
- Listen for malfunction alarms, and shut down equipment and notify supervisors when necessary.
- Notify or signal other workers to operate equipment or when processing is complete.
- Turn valves or start pumps to add ingredients or drain products from equipment and to transfer products for storage, cooling, or further processing.
- Admit required amounts of water, steam, cooking oils, or compressed air into equipment, such as by opening water valves to cool mixtures to the desired consistency.
- Activate agitators and paddles to mix or stir ingredients, stopping machines when ingredients are thoroughly mixed.
- Operate auxiliary machines and equipment, such as grinders, canners, and molding presses, to prepare or further process products.
- Place products on conveyors or carts, and monitor product flow.
- Transport items to work or storage areas, using carts.
- Mark or discard items with defects such as spots, stains, scars, snags, chips, scratches, or unacceptable shapes or finishes.
- Trim excess material or cut threads off finished products, such as cutting loose ends of plastic off a manufactured toy for a smoother finish.
- Cut, shape, and trim materials, such as textiles, food, glass, stone, and metal, using knives, scissors, and other hand tools, portable power tools, or bench-mounted tools.
- Position templates or measure materials to locate specified points of cuts or to obtain maximum yields, using rules, scales, or patterns.
- Read work orders to determine dimensions, cutting locations, and quantities to cut.
- Mark cutting lines around patterns or templates, or follow layout points, using squares, rules, and straightedges, and chalk, pencils, or scribes.
- Mark identification numbers, trademarks, grades, marketing data, sizes, or model numbers on products.
- Unroll, lay out, attach, or mount materials or items on cutting tables or machines.
- Separate materials or products according to size, weight, type, condition, color, or shade.
- Fold or shape materials before or after cutting them.
- Replace or sharpen dulled cutting tools such as saws.
- Lower table-mounted cutters such as knife blades, cutting wheels, or saws to cut items to specified sizes.
- Stack cut items and load them on racks or conveyors or onto trucks.
- Adjust guides and stops to control depths and widths of cuts.
- Count or weigh and bundle items.
- Clean, treat, buff, or polish finished items, using grinders, brushes, chisels, and cleaning solutions and polishing materials.
- Route items to provide cutouts for parts, using portable routers, grinders, and hand tools.
- Transport items to work or storage areas, using carts.
- Transport materials and products to and from work areas, manually or using carts, handtrucks, or hoists.
- Monitor equipment operation, gauges, and panel lights to detect deviations from standards.
- Confer with supervisors or other equipment operators to report equipment malfunctions or to resolve production problems.
- Press and adjust controls to activate, set, and regulate equipment according to specifications.
- Record gauge readings, test results, and shift production in log books.
- Read and interpret work orders and instructions to determine work assignments, process specifications, and production schedules.
- Examine or test samples of processed substances, or collect samples for laboratory testing, to ensure conformance to specifications.
- Stop equipment and clear blockages or jams, using fingers, wire, or hand tools.
- Load equipment receptacles or conveyors with material to be processed, by hand or using hoists.
- Remove products from equipment, manually or using hoists, and prepare them for storage, shipment, or additional processing.
- Calculate amounts of materials to be loaded into furnaces, adjusting amounts as necessary for specific conditions.
- Melt or refine metal before casting, calculating required temperatures, and observe metal color, adjusting controls as necessary to maintain required temperatures.
- Weigh or measure specified amounts of ingredients or materials for processing, using devices such as scales and calipers.
- Direct crane operators and crew members to load vessels with materials to be processed.
- Feed fuel, such as coal and coke, into fireboxes or onto conveyors, and remove ashes from furnaces, using shovels and buckets.
- Replace worn or defective equipment parts, using hand tools.
- Clean, lubricate, and adjust equipment, using scrapers, solvents, air hoses, oil, and hand tools.
- Sprinkle chemicals on the surface of molten metal to bring impurities to surface and remove impurities, using strainers.
- Transport materials and products to and from work areas, manually or using carts, handtrucks, or hoists.
- Transfer equipment, objects, or parts to specified work areas, using moving devices.
- Verify quality of finished workpieces by inspecting them, comparing them to templates, measuring their dimensions, or testing them in working machinery.
- Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools.
- Measure and mark equipment, objects, or parts to ensure grinding and polishing standards are met.
- Trim, scrape, or deburr objects or parts, using chisels, scrapers, and other hand tools and equipment.
- Mark defects, such as knotholes, cracks, and splits, for repair.
- Study blueprints or layouts to determine how to lay out workpieces or saw out templates.
- Move controls to adjust, start, or stop equipment during grinding and polishing processes.
- Load and adjust workpieces onto equipment or work tables, using hand tools.
- Repair and maintain equipment, objects, or parts, using hand tools.
- Select files or other abrasives, according to materials, sizes and shapes of workpieces, amount of stock to be removed, finishes specified, and steps in finishing processes.
- File grooved, contoured, and irregular surfaces of metal objects, such as metalworking dies and machine parts, to conform to templates, other parts, layouts, or blueprint specifications.
- Sharpen abrasive grinding tools, using machines and hand tools.
- Remove completed workpieces from equipment or work tables, using hand tools, and place workpieces in containers.
- Record product and processing data on specified forms.
- Apply solutions and chemicals to equipment, objects, or parts, using hand tools.
- Wash grit from stone, using hoses.
- Clean brass particles from files by drawing file cards through file grooves.
- Transfer equipment, objects, or parts to specified work areas, using moving devices.
- Push racks or carts to transfer products to storage, cooling stations, or the next stage of processing.
- Observe, feel, taste, or otherwise examine products during and after processing to ensure conformance to standards.
- Set temperature and time controls, light ovens, burners, driers, or roasters, and start equipment, such as conveyors, cylinders, blowers, driers, or pumps.
- Observe temperature, humidity, pressure gauges, and product samples and adjust controls, such as thermostats and valves, to maintain prescribed operating conditions for specific stages.
- Observe flow of materials and listen for machine malfunctions, such as jamming or spillage, and notify supervisors if corrective actions fail.
- Record production data, such as weight and amount of product processed, type of product, and time and temperature of processing.
- Weigh or measure products, using scale hoppers or scale conveyors.
- Operate or tend equipment that roasts, bakes, dries, or cures food items such as cocoa and coffee beans, grains, nuts, and bakery products.
- Signal coworkers to synchronize flow of materials.
- Read work orders to determine quantities and types of products to be baked, dried, or roasted.
- Fill or remove product from trays, carts, hoppers, or equipment, using scoops, peels, or shovels, or by hand.
- Take product samples during or after processing for laboratory analyses.
- Test products for moisture content, using moisture meters.
- Clear or dislodge blockages in bins, screens, or other equipment, using poles, brushes, or mallets.
- Start conveyors to move roasted grain to cooling pans and agitate grain with rakes as blowers force air through perforated bottoms of pans.
- Open valves, gates, or chutes or use shovels to load or remove products from ovens or other equipment.
- Clean equipment with steam, hot water, and hoses.
- Smooth out products in bins, pans, trays, or conveyors, using rakes or shovels.
- Install equipment, such as spray units, cutting blades, or screens, using hand tools.
- Dump sugar dust from collectors into melting tanks and add water to reclaim sugar lost during processing.
- Push racks or carts to transfer products to storage, cooling stations, or the next stage of processing.
- Transfer materials, supplies, or products between work areas, using moving equipment or hand tools.
- Weigh or measure materials, ingredients, or products to ensure conformance to requirements.
- Read work orders to determine production specifications or information.
- Observe production or monitor equipment to ensure safe and efficient operation.
- Mix or blend ingredients by starting machines and mixing for specified times.
- Stop mixing or blending machines when specified product qualities are obtained and open valves and start pumps to transfer mixtures.
- Compound or process ingredients or dyes, according to formulas.
- Examine materials, ingredients, or products visually or with hands to ensure conformance to established standards.
- Operate or tend machines to mix or blend any of a wide variety of materials, such as spices, dough batter, tobacco, fruit juices, chemicals, livestock feed, food products, color pigments, or explosive ingredients.
- Dump or pour specified amounts of materials into machinery or equipment.
- Record operational or production data on specified forms.
- Collect samples of materials or products for laboratory testing.
- Unload mixtures into containers or onto conveyors for further processing.
- Clean work areas.
- Add or mix chemicals or ingredients for processing, using hand tools or other devices.
- Tend accessory equipment, such as pumps or conveyors, to move materials or ingredients through production processes.
- Clean and maintain equipment, using hand tools.
- Dislodge and clear jammed materials or other items from machinery or equipment, using hand tools.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Open valves to drain slurry from mixers into storage tanks.
- Transfer materials, supplies, or products between work areas, using moving equipment or hand tools.
- Participate in nuclear fuel element handling activities, such as preparation, transfer, loading, or unloading.
- Operate nuclear power reactors in accordance with policies and procedures to protect workers from radiation and to ensure environmental safety.
- Adjust controls to position rod and to regulate flux level, reactor period, coolant temperature, or rate of power flow, following standard procedures.
- Develop or implement actions such as lockouts, tagouts, or clearances to allow equipment to be safely repaired.
- Respond to system or unit abnormalities, diagnosing the cause, and recommending or taking corrective action.
- Monitor all systems for normal running conditions, performing activities such as checking gauges to assess output or the effects of generator loading on other equipment.
- Monitor or operate boilers, turbines, wells, or auxiliary power plant equipment.
- Record operating data, such as the results of surveillance tests.
- Implement operational procedures, such as those controlling start-up or shut-down activities.
- Note malfunctions of equipment, instruments, or controls and report these conditions to supervisors.
- Dispatch orders or instructions to personnel through radiotelephone or intercommunication systems to coordinate auxiliary equipment operation.
- Review and edit standard operating procedures.
- Conduct inspections or operations outside of control rooms as necessary.
- Direct reactor operators in emergency situations, in accordance with emergency operating procedures.
- Authorize maintenance activities on units or changes in equipment or system operational status.
- Supervise technicians' work activities to ensure that equipment is operated in accordance with policies and procedures that protect workers from radiation and ensure environmental safety.
- Authorize actions to correct identified operational inefficiencies or hazards so that operating efficiency is maximized and potential environmental issues are minimized.
- Direct the collection and testing of air, water, gas, or solid samples to determine radioactivity levels or to ensure appropriate radioactive containment.
- Direct measurement of the intensity or types of radiation in work areas, equipment, or materials.
- Identify or direct implementation of appropriate decontamination procedures, based on equipment and the size, nature, and type of contamination.
- Participate in nuclear fuel element handling activities, such as preparation, transfer, loading, or unloading.
- Pass sliver strands through openings in floors to workers on floors below who wind slivers onto tubes.
- Set up, operate, or tend machines that extrude and form filaments from synthetic materials such as rayon, fiberglass, or liquid polymers.
- Press buttons to stop machines when processes are complete or when malfunctions are detected.
- Notify other workers of defects, and direct them to adjust extruding and forming machines.
- Observe machine operations, control boards, and gauges to detect malfunctions such as clogged bushings and defective binder applicators.
- Load materials into extruding and forming machines, using hand tools, and adjust feed mechanisms to set feed rates.
- Move controls to activate and adjust extruding and forming machines.
- Record details of machine malfunctions.
- Clean and maintain extruding and forming machines, using hand tools.
- Observe flow of finish across finish rollers, and turn valves to adjust flow to specifications.
- Remove polymer deposits from spinnerettes and equipment, using silicone spray, brass chisels, and bronze-wool pads.
- Press metering-pump buttons and turn valves to stop flow of polymers.
- Record operational data on tags, and attach tags to machines.
- Start metering pumps and observe operation of machines and equipment to ensure continuous flow of filaments extruded through spinnerettes and to detect processing defects.
- Remove excess, entangled, or completed filaments from machines, using hand tools.
- Wipe finish rollers with cloths and wash finish trays with water when necessary.
- Lower pans inside cabinets to catch molten filaments until flow of polymer through packs has stopped.
- Open cabinet doors to cut multifilament threadlines away from guides, using scissors.
- Turn rheostats to obtain specified temperatures in electric furnaces where glass is melted.
- Turn petcocks to adjust the flow of binding fluid to sleeves.
- Pull extruded fiberglass filaments over sleeves where binding solution is applied, and into grooves of graphite shoes that bind filaments into single strands of sliver.
- Pass sliver strands through openings in floors to workers on floors below who wind slivers onto tubes.
- Transfer materials, supplies, and products between work areas, using moving equipment and hand tools.
- Observe operation of equipment to ensure continuity of flow, safety, and efficient operation, and to detect malfunctions.
- Examine materials, ingredients, or products, visually or with hands, to ensure conformance to established standards.
- Move controls to start, stop, or adjust machinery and equipment that crushes, grinds, polishes, or blends materials.
- Clean, adjust, and maintain equipment, using hand tools.
- Weigh or measure materials, ingredients, or products at specified intervals to ensure conformance to requirements.
- Read work orders to determine production specifications and information.
- Dislodge and clear jammed materials or other items from machinery and equipment, using hand tools.
- Tend accessory equipment, such as pumps and conveyors, to move materials or ingredients through production processes.
- Record data from operations, testing, and production on specified forms.
- Load materials into machinery and equipment, using hand tools.
- Clean work areas.
- Notify supervisors of needed repairs.
- Reject defective products and readjust equipment to eliminate problems.
- Inspect chains, belts, or scrolls for signs of wear.
- Test samples of materials or products to ensure compliance with specifications, using test equipment.
- Collect samples of materials or products for laboratory testing.
- Set mill gauges to specified fineness of grind.
- Mark bins as to types of mixtures stored.
- Turn valves to regulate the moisture contents of materials.
- Add or mix chemicals and ingredients for processing, using hand tools or other devices.
- Break mixtures to size, using picks.
- Transfer materials, supplies, and products between work areas, using moving equipment and hand tools.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Maintain processing, production, and inspection information and reports.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Set, adjust, and readjust computerized or mechanical equipment controls to regulate power level, temperature, vacuum, and rotation speed of furnace, according to crystal growing specifications.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Load semiconductor material into furnace.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Count, sort, and weigh processed items.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Operate saw to cut remelt into sections of specified size or to cut ingots into wafers.
- Scribe or separate wafers into dice.
- Connect reactor to computer, using hand tools and power tools.
- Mount crystal ingots or wafers on blocks or plastic laminate, using special mounting devices, to facilitate their positioning in the holding fixtures of sawing, drilling, grinding or sanding equipment.
- Attach ampoule to diffusion pump to remove air from ampoule, and seal ampoule, using blowtorch.
- Measure and weigh amounts of crystal growing materials, mix and grind materials, load materials into container, and monitor processing procedures to help identify crystal growing problems.
- Locate crystal axis of ingot, and draw orientation lines on ingot, using x-ray equipment, drill, and sanding machine.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Place products on carts or conveyors to transfer them to the next stage of processing.
- Record production and test data for each food product batch, such as the ingredients used, temperature, test results, and time cycle.
- Clean and sterilize vats and factory processing areas.
- Set up, operate, and tend equipment that cooks, mixes, blends, or processes ingredients in the manufacturing of food products, according to formulas or recipes.
- Mix or blend ingredients, according to recipes, using a paddle or an agitator, or by controlling vats that heat and mix ingredients.
- Follow recipes to produce food products of specified flavor, texture, clarity, bouquet, or color.
- Give directions to other workers who are assisting in the batchmaking process.
- Select and measure or weigh ingredients, using English or metric measures and balance scales.
- Press switches and turn knobs to start, adjust, and regulate equipment, such as beaters, extruders, discharge pipes, and salt pumps.
- Determine mixing sequences, based on knowledge of temperature effects and of the solubility of specific ingredients.
- Observe and listen to equipment to detect possible malfunctions, such as leaks or plugging, and report malfunctions or undesirable tastes to supervisors.
- Observe gauges and thermometers to determine if the mixing chamber temperature is within specified limits, and turn valves to control the temperature.
- Turn valve controls to start equipment and to adjust operation to maintain product quality.
- Modify cooking and forming operations based on the results of sampling processes, adjusting time cycles and ingredients to achieve desired qualities, such as firmness or texture.
- Examine, feel, and taste product samples during production to evaluate quality, color, texture, flavor, and bouquet, and document the results.
- Test food product samples for moisture content, acidity level, specific gravity, or butter-fat content, and continue processing until desired levels are reached.
- Inspect vats after cleaning to ensure that fermentable residue has been removed.
- Fill processing or cooking containers, such as kettles, rotating cookers, pressure cookers, or vats, with ingredients, by opening valves, by starting pumps or injectors, or by hand.
- Manipulate products, by hand or using machines, to separate, spread, knead, spin, cast, cut, pull, or roll products.
- Cool food product batches on slabs or in water-cooled kettles.
- Homogenize or pasteurize material to prevent separation or to obtain prescribed butterfat content, using a homogenizing device.
- Grade food products according to government regulations or according to type, color, bouquet, and moisture content.
- Operate refining machines to reduce the particle size of cooked batches.
- Formulate or modify recipes for specific kinds of food products.
- Inspect and pack the final product.
- Place products on carts or conveyors to transfer them to the next stage of processing.
- Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks.
- Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
- Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines.
- Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices, such as rulers, micrometers, or scales.
- Press buttons, pull levers, or depress pedals to start and operate cutting and slicing machines.
- Start machines to verify setups, and make any necessary adjustments.
- Feed stock into cutting machines, onto conveyors, or under cutting blades, by threading, guiding, pushing, or turning handwheels.
- Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment.
- Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material.
- Adjust machine controls to alter position, alignment, speed, or pressure.
- Remove completed materials or products from cutting or slicing machines, and stack or store them for additional processing.
- Maintain production records, such as quantities, types, and dimensions of materials produced.
- Remove defective or substandard materials from machines, and readjust machine components so that products meet standards.
- Position stock along cutting lines, or against stops on beds of scoring or cutting machines.
- Select and install machine components, such as cutting blades, rollers, and templates, according to specifications, using hand tools.
- Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans.
- Operate cranes, or signal crane operators to position or remove stone from cars or saw beds.
- Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes.
- Start pumps to circulate water and abrasives onto blades or cables during cutting.
- Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
- Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools.
- Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames.
- Direct workers on cutting teams.
- Sharpen cutting blades, knives, or saws, using files, bench grinders, or honing stones.
- Turn cranks or press buttons to activate winches that move cars under sawing cables or saw frames.
- Tighten pulleys or add abrasives to maintain cutting speeds.
- Cut stock manually to prepare for machine cutting, using tools such as knives, cleavers, handsaws, or hammers and chisels.
- Wash stones, using water hoses.
- Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Adjust machine components to regulate speeds, pressures, and temperatures, and amounts, dimensions, and flow of materials or ingredients.
- Press control buttons to activate machinery and equipment.
- Examine, measure, and weigh materials or products to verify conformance to standards, using measuring devices such as templates, micrometers, or scales.
- Monitor machine operations and observe lights and gauges to detect malfunctions.
- Clear jams, and remove defective or substandard materials or products.
- Notify supervisors when extruded filaments fail to meet standards.
- Record and maintain production data, such as meter readings, and quantities, types, and dimensions of materials produced.
- Review work orders, specifications, or instructions to determine materials, ingredients, procedures, components, settings, and adjustments for extruding, forming, pressing, or compacting machines.
- Turn controls to adjust machine functions, such as regulating air pressure, creating vacuums, and adjusting coolant flow.
- Clean dies, arbors, compression chambers, and molds, using swabs, sponges, or air hoses.
- Synchronize speeds of sections of machines when producing products involving several steps or processes.
- Activate machines to shape or form products, such as candy bars, light bulbs, balloons, or insulation panels.
- Select and install machine components, such as dies, molds, and cutters, according to specifications, using hand tools and measuring devices.
- Send product samples to laboratories for analysis.
- Couple air and gas lines to machines to maintain plasticity of material and to regulate solidification of final products.
- Pour, scoop, or dump specified ingredients, metal assemblies, or mixtures into sections of machine prior to starting machines.
- Measure, mix, cut, shape, soften, and join materials and ingredients, such as powder, cornmeal, or rubber to prepare them for machine processing.
- Remove materials or products from molds or from extruding, forming, pressing, or compacting machines, and stack or store them for additional processing.
- Feed products into machines by hand or conveyor.
- Measure arbors and dies to verify sizes specified on work tickets.
- Thread extruded strips through water tanks and hold-down bars, or attach strands to wires and draw them through tubes.
- Complete work tickets, and place them with products.
- Disassemble equipment to repair it or to replace parts, such as nozzles, punches, and filters.
- Remove molds, mold components, and feeder tubes from machinery after production is complete.
- Swab molds with solutions to prevent products from sticking.
- Ignite burners to preheat products, or use torches to apply heat.
- Install, align, and adjust neck rings, press plungers, and feeder tubes.
- Move materials, supplies, components, and finished products between storage and work areas, using work aids such as racks, hoists, and handtrucks.
- Transfer components, metal products, or assemblies, using moving equipment.
- Inspect, measure, or test completed metal workpieces to ensure conformance to specifications, using measuring and testing devices.
- Read blueprints, work orders, or production schedules to determine product or job instructions or specifications.
- Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components.
- Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies.
- Lay out, fit, or connect parts to be bonded, calculating production measurements, as necessary.
- Correct problems by adjusting controls or by stopping machines and opening holding devices.
- Give directions to other workers regarding machine set-up and use.
- Select, position, align, and bolt jigs, holding fixtures, guides, or stops onto machines, using measuring instruments and hand tools.
- Mark weld points and positions of components on workpieces, using rules, squares, templates, or scribes.
- Clean, lubricate, maintain, and adjust equipment to maintain efficient operation, using air hoses, cleaning fluids, and hand tools.
- Prepare metal surfaces or workpieces, using hand-operated equipment, such as grinders, cutters, or drills.
- Conduct trial runs before welding, soldering, or brazing, and make necessary adjustments to equipment.
- Remove completed workpieces or parts from machinery, using hand tools.
- Tend auxiliary equipment used in welding processes.
- Load or feed workpieces into welding machines to join or bond components.
- Observe meters, gauges, or machine operations to ensure that soldering or brazing processes meet specifications.
- Turn and press knobs and buttons or enter operating instructions into computers to adjust and start welding machines.
- Compute and record settings for new work, applying knowledge of metal properties, principles of welding, and shop mathematics.
- Set dials and timing controls to regulate electrical current, gas flow pressure, heating or cooling cycles, or shut-off.
- Record operational information on specified production reports.
- Select torch tips, alloys, flux, coil, tubing, or wire, according to metal types or thicknesses, data charts, or records.
- Fill hoppers and position spouts to direct flow of flux or manually brush flux onto seams of workpieces.
- Start, monitor, and adjust robotic welding production lines.
- Devise or build fixtures or jigs used to hold parts in place during welding, brazing, or soldering.
- Add chemicals or materials to workpieces or machines to facilitate bonding or to cool workpieces.
- Immerse completed workpieces into water or acid baths to cool and clean components.
- Dress electrodes, using tip dressers, files, emery cloths, or dressing wheels.
- Anneal finished workpieces to relieve internal stress.
- Transfer components, metal products, or assemblies, using moving equipment.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.
- Measure and visually inspect products for surface and dimension defects to ensure conformance to specifications, using precision measuring instruments.
- Observe continuous operation of automatic machines to ensure that products meet specifications and to detect jams or malfunctions, making adjustments as necessary.
- Set up, operate, or tend metal or plastic molding, casting, or coremaking machines to mold or cast metal or thermoplastic parts or products.
- Turn valves and dials of machines to regulate pressure, temperature, and speed and feed rates, and to set cycle times.
- Read specifications, blueprints, and work orders to determine setups, temperatures, and time settings required to mold, form, or cast plastic materials, as well as to plan production sequences.
- Observe meters and gauges to verify and record temperatures, pressures, and press-cycle times.
- Connect water hoses to cooling systems of dies, using hand tools.
- Remove parts, such as dies, from machines after production runs are finished.
- Perform maintenance work such as cleaning and oiling machines.
- Smooth and clean inner surfaces of molds, using brushes, scrapers, air hoses, or grinding wheels, and fill imperfections with refractory material.
- Operate hoists to position dies or patterns on foundry floors.
- Cool products after processing to prevent distortion.
- Install dies onto machines or presses and coat dies with parting agents, according to work order specifications.
- Unload finished products from conveyor belts, pack them in containers, and place containers in warehouses.
- Remove finished or cured products from dies or molds, using hand tools, air hoses, and other equipment, stamping identifying information on products when necessary.
- Select and install blades, tools, or other attachments for each operation.
- Repair or replace damaged molds, pipes, belts, chains, or other equipment, using hand tools, hand-powered presses, or jib cranes.
- Inventory and record quantities of materials and finished products, requisitioning additional supplies as necessary.
- Select coolants and lubricants, and start their flow.
- Adjust equipment and workpiece holding fixtures, such as mold frames, tubs, and cutting tables, to ensure proper functioning.
- Maintain inventories of materials.
- Position and secure workpieces on machines, and start feeding mechanisms.
- Trim excess material from parts, using knives, and grind scrap plastic into powder for reuse.
- Mix and measure compounds, or weigh premixed compounds, and dump them into machine tubs, cavities, or molds.
- Spray, smoke, or coat molds with compounds to lubricate or insulate molds, using acetylene torches or sprayers.
- Preheat tools, dies, plastic materials, or patterns, using blowtorches or other equipment.
- Pour or load metal or sand into melting pots, furnaces, molds, or hoppers, using shovels, ladles, or machines.
- Clamp metal and plywood strips around dies or patterns to form molds.
- Pull level and toggle latches to fill molds, to regulate tension on sheeting, and to release mold covers.
- Skim or pour dross, slag, or impurities from molten metal, using ladles, rakes, hoes, spatulas, or spoons.
- Shape molds to specified contours, using sand, and trowels and related tools.
- Assemble shell halves, patterns, and foundry flasks, and reinforce core boxes, using glue, clamps, wire, bolts, rams, or machines.
- Obtain and move specified patterns to work stations, manually or using hoists, and secure patterns to machines, using wrenches.