- Clean and polish metal items and jewelry pieces, using jewelers' tools, polishing wheels, and chemical baths.
Occupations with related tasks Save Table: XLSX CSV
Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
3 | 3 | 2 | 51-9194.00 | Etchers and Engravers |
3 | 3 | 2 | 51-4193.00 | Plating Machine Setters, Operators, and Tenders, Metal and Plastic |
2 | 2 | 1 | 51-9123.00 | Painting, Coating, and Decorating Workers |
2 | 2 | 2 | 51-9083.00 | Ophthalmic Laboratory Technicians |
2 | 2 | 2 | 51-7021.00 | Furniture Finishers |
2 | 2 | 2 | 51-9141.00 | Semiconductor Processing Technicians
|
2 | 2 | 2 | 51-2011.00 | Aircraft Structure, Surfaces, Rigging, and Systems Assemblers |
1 | 2 | 3 | 51-4111.00 | Tool and Die Makers |
1 | 2 | 2 | 51-9022.00 | Grinding and Polishing Workers, Hand |
1 | 2 | 2 | 51-9197.00 | Tire Builders |
1 | 2 | 2 | 51-9195.00 | Molders, Shapers, and Casters, Except Metal and Plastic |
1 | 2 | 2 | 51-9124.00 | Coating, Painting, and Spraying Machine Setters, Operators, and Tenders |
1 | 1 | 2 | 51-2023.00 | Electromechanical Equipment Assemblers
|
1 | 1 | 3 | 51-9082.00 | Medical Appliance Technicians |
1 | 1 | 3 | 51-4062.00 | Patternmakers, Metal and Plastic |
1 | 1 | 3 | 49-9064.00 | Watch and Clock Repairers |
1 | 1 | 2 | 51-9195.03 | Stone Cutters and Carvers, Manufacturing |
1 | 1 | 2 | 51-9081.00 | Dental Laboratory Technicians |
1 | 1 | 2 | 51-2022.00 | Electrical and Electronic Equipment Assemblers
|
1 | 1 | 2 | 51-2061.00 | Timing Device Assemblers and Adjusters |
1 | 1 | 2 | 53-6032.00 | Aircraft Service Attendants
|
1 | 1 | 2 | 49-3022.00 | Automotive Glass Installers and Repairers |
1 | 1 | 1 | 51-9031.00 | Cutters and Trimmers, Hand |
1 | 1 | 2 | 51-4023.00 | Rolling Machine Setters, Operators, and Tenders, Metal and Plastic |
1 | 1 | 3 | 51-9071.06 | Gem and Diamond Workers |
1 | 1 | 2 | 51-6041.00 | Shoe and Leather Workers and Repairers |
1 | 1 | 2 | 51-4121.00 | Welders, Cutters, Solderers, and Brazers |
1 | 1 | 2 | 51-9198.00 | Helpers--Production Workers |
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Inspect etched work for depth of etching, uniformity, and defects, using calibrated microscopes, gauges, fingers, or magnifying lenses.
- Examine sketches, diagrams, samples, blueprints, or photographs to decide how designs are to be etched, cut, or engraved onto workpieces.
- Engrave and print patterns, designs, etchings, trademarks, or lettering onto flat or curved surfaces of a wide variety of metal, glass, plastic, or paper items, using hand tools or hand-held power tools.
- Prepare etching chemicals according to formulas, diluting acid with water to obtain solutions of specified concentration.
- Use computer software to design patterns for engraving.
- Expose workpieces to acid to develop etch patterns such as designs, lettering, or figures.
- Adjust depths and sizes of cuts by adjusting heights of worktables, or by adjusting machine-arm gauges.
- Cut outlines of impressions with gravers, and remove excess material with knives.
- Measure and compute dimensions of lettering, designs, or patterns to be engraved.
- Examine engraving for quality of cut, burrs, rough spots, and irregular or incomplete engraving.
- Transfer image to workpiece, using contact printer, pantograph stylus, silkscreen printing device, or stamp pad.
- Set reduction scales to attain specified sizes of reproduction on workpieces, and set pantograph controls for required heights, depths, and widths of cuts.
- Print proofs or examine designs to verify accuracy of engraving, and rework engraving as required.
- Position and clamp workpieces, plates, or rollers in holding fixtures.
- Remove wax or tape from etched glassware by using a stylus or knife, or by immersing ware in hot water.
- Guide stylus over template, causing cutting tool to duplicate design or letters on workpiece.
- Start machines and lower cutting tools to beginning points on patterns.
- Determine machine settings, and move bars or levers to reproduce designs on rollers or plates.
- Remove completed workpieces and place them in trays.
- Insert cutting tools or bits into machines and secure them with wrenches.
- Sandblast exposed areas of glass to cut designs in surfaces, using spray guns.
- Sketch, trace, or scribe layout lines and designs on workpieces, plates, dies, or rollers, using compasses, scribers, gravers, or pencils.
- Fill etched characters with opaque paste to improve readability.
- Brush or wipe acid over engraving to darken or highlight inscriptions.
- Select and insert required templates into pattern frames beneath the stylus of a machine cutting tool or router.
- Observe actions of cutting tools through microscopes and adjust stylus movement to ensure accurate reproduction.
- Carve designs and letters onto metal for transfer to other surfaces.
- Clean and polish engraved areas.
- Prepare workpieces for etching or engraving by cutting, sanding, cleaning, polishing, or treating them with wax, acid resist, lime, etching powder, or light-sensitive enamel.
- Neutralize workpieces to remove acid, wax, or enamel, using water, solvents, brushes, or specialized machines.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Clean workpieces, using wire brushes.
- Immerse workpieces in coating solutions or liquid metal or plastic for specified times.
- Adjust dials to regulate flow of current and voltage supplied to terminals to control plating processes.
- Inspect coated or plated areas for defects, such as air bubbles or uneven coverage.
- Set up, operate, or tend plating or coating machines to coat metal or plastic products with chromium, zinc, copper, cadmium, nickel, or other metal to protect or decorate surfaces.
- Observe gauges to ensure that machines are operating properly, making adjustments or stopping machines when problems occur.
- Remove objects from solutions at periodic intervals and observe objects to verify conformance to specifications.
- Maintain production records.
- Remove excess materials or impurities from objects, using air hoses or grinding machines.
- Examine completed objects to determine thicknesses of metal deposits, or measure thicknesses by using instruments such as micrometers.
- Determine sizes and compositions of objects to be plated, and amounts of electrical current and time required.
- Test machinery to ensure that it is operating properly.
- Measure or weigh materials, using rulers, calculators, and scales.
- Measure, mark, and mask areas to be excluded from plating.
- Immerse objects to be coated or plated into cleaning solutions, or spray objects with conductive solutions to prepare them for plating.
- Read production schedules to determine setups of equipment and machines.
- Suspend objects, such as parts or molds from cathode rods, or negative terminals, and immerse objects in plating solutions.
- Suspend sticks or pieces of plating metal from anodes, or positive terminals, and immerse metal in plating solutions.
- Adjust controls to set temperatures of coating substances and speeds of machines and equipment.
- Monitor and measure thicknesses of electroplating on component parts to verify conformance to specifications, using micrometers.
- Operate hoists to place workpieces onto machine feed carriages or spindles.
- Position and feed materials into processing machines, by hand or by using automated equipment.
- Position objects to be plated in frames, or suspend them from positive or negative terminals of power supplies.
- Spray coating in specified patterns according to instructions.
- Clean and maintain equipment, using water hoses and scrapers.
- Plate small objects, such as nuts or bolts, using motor-driven barrels.
- Mix and test solutions, and turn valves to fill tanks with solutions.
- Replace worn parts and adjust equipment components, using hand tools.
- Place plated or coated materials on racks and transfer them to ovens to dry for specified periods of time.
- Measure and set stops, rolls, brushes, and guides on automatic feeders and conveying equipment or coating machines, using micrometers, rules, and hand tools.
- Position containers to receive parts, and load or unload materials in containers, using dollies or handtrucks.
- Attach nozzles, position guns, connect hoses, and thread wire to set up metal-spraying machines.
- Perform equipment maintenance, such as cleaning tanks and lubricating moving parts of conveyors.
- Install gears and holding devices on conveyor equipment.
- Preheat workpieces in ovens.
- Cut metal or other materials, using shears or band saws.
- Rinse coated objects in cleansing liquids and dry them with cloths, centrifugal driers, or by tumbling in sawdust-filled barrels.
- Operate sandblasting equipment to roughen and clean surfaces of workpieces.
- Clean workpieces, using wire brushes.
- Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.
- Rinse, drain, or wipe coated workpieces to remove excess coating material or to facilitate setting of finish coats on workpieces.
- Apply coatings, such as paint, ink, or lacquer, to protect or decorate workpiece surfaces, using spray guns, pens, or brushes.
- Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.
- Clean and maintain tools and equipment, using solvents, brushes, and rags.
- Read job orders and inspect workpieces to determine work procedures and materials required.
- Immerse workpieces into coating materials for specified times.
- Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers.
- Place coated workpieces in ovens or dryers for specified times to dry or harden finishes.
- Conceal blemishes in workpieces, such as nicks and dents, using fillers such as putty.
- Melt or heat coating materials to specified temperatures.
- Cut out sections in surfaces of materials to be inlaid with decorative pieces, using patterns and knives or scissors.
- Position and glue decorative pieces in cutout sections of workpieces, following patterns.
- Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.
- Rinse, drain, or wipe coated workpieces to remove excess coating material or to facilitate setting of finish coats on workpieces.
- Clean finished lenses and eyeglasses, using cloths and solvents.
- Set dials and start machines to polish lenses or hold lenses against rotating wheels to polish them manually.
- Mount and secure lens blanks or optical lenses in holding tools or chucks of cutting, polishing, grinding, or coating machines.
- Inspect lens blanks to detect flaws, verify smoothness of surface, and ensure thickness of coating on lenses.
- Set up machines to polish, bevel, edge, or grind lenses, flats, blanks, or other precision optical elements.
- Inspect, weigh, and measure mounted or unmounted lenses after completion to verify alignment and conformance to specifications, using precision instruments.
- Shape lenses appropriately so that they can be inserted into frames.
- Mount, secure, and align finished lenses in frames or optical assemblies, using precision hand tools.
- Examine prescriptions, work orders, or broken or used eyeglasses to determine specifications for lenses, contact lenses, or other optical elements.
- Adjust lenses and frames to correct alignment.
- Select lens blanks, molds, tools, and polishing or grinding wheels, according to production specifications.
- Position and adjust cutting tools to specified curvature, dimensions, and depth of cut.
- Assemble eyeglass frames and attach shields, nose pads, and temple pieces, using pliers, screwdrivers, and drills.
- Repair broken parts, using precision hand tools and soldering irons.
- Immerse eyeglass frames in solutions to harden, soften, or dye frames.
- Lay out lenses and trace lens outlines on glass, using templates.
- Control equipment that coats lenses to alter their reflective qualities.
- Remove lenses from molds and separate lenses in containers for further processing or storage.
- Clean finished lenses and eyeglasses, using cloths and solvents.
- Set dials and start machines to polish lenses or hold lenses against rotating wheels to polish them manually.
- Remove excess solvent, using cloths soaked in paint thinner.
- Wash surfaces to prepare them for finish application.
- Brush, spray, or hand-rub finishing ingredients, such as paint, oil, stain, or wax, onto and into wood grain and apply lacquer or other sealers.
- Fill and smooth cracks or depressions, remove marks and imperfections, and repair broken parts, using plastic or wood putty, glue, nails, or screws.
- Smooth, shape, and touch up surfaces to prepare them for finishing, using sandpaper, pumice stones, steel wool, chisels, sanders, or grinders.
- Remove accessories prior to finishing, and mask areas that should not be exposed to finishing processes or substances.
- Remove old finishes and damaged or deteriorated parts, using hand tools, stripping tools, sandpaper, steel wool, abrasives, solvents, or dip baths.
- Treat warped or stained surfaces to restore original contours and colors.
- Select appropriate finishing ingredients such as paint, stain, lacquer, shellac, or varnish, depending on factors such as wood hardness and surface type.
- Mix finish ingredients to obtain desired colors or shades.
- Examine furniture to determine the extent of damage or deterioration, and to decide on the best method for repair or restoration.
- Distress surfaces with woodworking tools or abrasives before staining to create an antique appearance, or rub surfaces to bring out highlights and shadings.
- Stencil, gild, emboss, mark, or paint designs or borders to reproduce the original appearance of restored pieces, or to decorate new pieces.
- Disassemble items to prepare them for finishing, using hand tools.
- Confer with customers to determine furniture colors or finishes.
- Recommend woods, colors, finishes, and furniture styles, using knowledge of wood products, fashions, and styles.
- Follow blueprints to produce specific designs.
- Paint metal surfaces electrostatically, or by using a spray gun or other painting equipment.
- Replace or refurbish upholstery of items, using tacks, adhesives, softeners, solvents, stains, or polish.
- Design, create, and decorate entire pieces or specific parts of furniture, such as draws for cabinets.
- Spread graining ink over metal portions of furniture to simulate wood-grain finish.
- Brush bleaching agents on wood surfaces to restore natural color.
- Remove excess solvent, using cloths soaked in paint thinner.
- Wash surfaces to prepare them for finish application.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Manipulate valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
- Maintain processing, production, and inspection information and reports.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Study work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
- Load and unload equipment chambers and transport finished product to storage or to area for further processing.
- Place semiconductor wafers in processing containers or equipment holders, using vacuum wand or tweezers.
- Set, adjust, and readjust computerized or mechanical equipment controls to regulate power level, temperature, vacuum, and rotation speed of furnace, according to crystal growing specifications.
- Etch, lap, polish, or grind wafers or ingots to form circuitry and change conductive properties, using etching, lapping, polishing, or grinding equipment.
- Load semiconductor material into furnace.
- Monitor operation and adjust controls of processing machines and equipment to produce compositions with specific electronic properties, using computer terminals.
- Count, sort, and weigh processed items.
- Calculate etching time based on thickness of material to be removed from wafers or crystals.
- Inspect equipment for leaks, diagnose malfunctions, and request repairs.
- Align photo mask pattern on photoresist layer, expose pattern to ultraviolet light, and develop pattern, using specialized equipment.
- Stamp, etch, or scribe identifying information on finished component according to specifications.
- Operate saw to cut remelt into sections of specified size or to cut ingots into wafers.
- Scribe or separate wafers into dice.
- Connect reactor to computer, using hand tools and power tools.
- Mount crystal ingots or wafers on blocks or plastic laminate, using special mounting devices, to facilitate their positioning in the holding fixtures of sawing, drilling, grinding or sanding equipment.
- Attach ampoule to diffusion pump to remove air from ampoule, and seal ampoule, using blowtorch.
- Measure and weigh amounts of crystal growing materials, mix and grind materials, load materials into container, and monitor processing procedures to help identify crystal growing problems.
- Locate crystal axis of ingot, and draw orientation lines on ingot, using x-ray equipment, drill, and sanding machine.
- Clean semiconductor wafers using cleaning equipment, such as chemical baths, automatic wafer cleaners, or blow-off wands.
- Clean and maintain equipment, including replacing etching and rinsing solutions and cleaning bath containers and work area.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Assemble parts, fittings, or subassemblies on aircraft, using layout tools, hand tools, power tools, or fasteners, such as bolts, screws, rivets, or clamps.
- Read blueprints, illustrations, or specifications to determine layouts, sequences of operations, or identities or relationships of parts.
- Attach brackets, hinges, or clips to secure or support components or subassemblies, using bolts, screws, rivets, chemical bonding, or welding.
- Inspect or test installed units, parts, systems, or assemblies for fit, alignment, performance, defects, or compliance with standards, using measuring instruments or test equipment.
- Adjust, repair, rework, or replace parts or assemblies to ensure proper operation.
- Cut, trim, file, bend, or smooth parts to ensure proper fit and clearance.
- Fabricate parts needed for assembly or installation, using shop machinery or equipment.
- Layout and mark reference points and locations for installation of parts or components, using jigs, templates, or measuring and marking instruments.
- Assemble prefabricated parts to form subassemblies.
- Set, align, adjust, or synchronize aircraft armament or rigging or control system components to established tolerances or requirements, using sighting devices and hand tools.
- Join structural assemblies, such as wings, tails, or fuselage.
- Position and align subassemblies in jigs or fixtures, using measuring instruments and following blueprint lines and index points.
- Assemble prototypes or integrated-technology demonstrators of new or emerging environmental technologies for aircraft.
- Swage fittings onto cables, using swaging machines.
- Manually install structural assemblies or signal crane operators to position assemblies for joining.
- Align, fit, assemble, connect, or install system components, using jigs, fixtures, measuring instruments, hand tools, or power tools.
- Set up or operate machines or systems to crimp, cut, bend, form, swage, flare, bead, burr, or straighten tubing, according to specifications.
- Place and connect control cables to electronically controlled units, using hand tools, ring locks, cotter keys, threaded connectors, turnbuckles, or related devices.
- Install mechanical linkages and actuators, using tensiometers to verify tension of cables.
- Install accessories in swaging machines, using hand tools.
- Mark identifying information on tubing or cable assemblies, using etching devices, labels, rubber stamps, or other methods.
- Verify dimensions of cable assemblies or positions of fittings, using measuring instruments.
- Weld tubing and fittings or solder cable ends, using tack welders, induction brazing chambers, or other equipment.
- Splice cables, using clamps and fittings, or reweave cable strands.
- Fit and fasten sheet metal coverings to surface areas or other sections of aircraft prior to welding or riveting.
- Capture or segregate waste material, such as aluminum swarf, machine cutting fluid, or solvents, for recycling or environmentally responsible disposal.
- Cut cables and tubing, using master templates, measuring instruments, and cable cutters or saws.
- Monitor robotic assembly equipment, such as snake-arm robots, used to assemble, seal, or swage aircraft structures.
- Clean, oil, or coat system components, as necessary, before assembly or attachment.
- Clean aircraft structures, parts, or components, using aqueous, semi-aqueous, aliphatic hydrocarbon, or organic solvent cleaning products or techniques to reduce carbon or other harmful emissions.
- Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
- File, grind, shim, and adjust different parts to properly fit them together.
- Verify dimensions, alignments, and clearances of finished parts for conformance to specifications, using measuring instruments such as calipers, gauge blocks, micrometers, or dial indicators.
- Set up and operate conventional or computer numerically controlled machine tools such as lathes, milling machines, or grinders to cut, bore, grind, or otherwise shape parts to prescribed dimensions and finishes.
- Visualize and compute dimensions, sizes, shapes, and tolerances of assemblies, based on specifications.
- Study blueprints, sketches, models, or specifications to plan sequences of operations for fabricating tools, dies, or assemblies.
- Fit and assemble parts to make, repair, or modify dies, jigs, gauges, and tools, using machine tools, hand tools, or welders.
- Inspect finished dies for smoothness, contour conformity, and defects.
- Select metals to be used from a range of metals and alloys, based on properties such as hardness or heat tolerance.
- Lift, position, and secure machined parts on surface plates or worktables, using hoists, vises, v-blocks, or angle plates.
- Measure, mark, and scribe metal or plastic stock to lay out machining, using instruments such as protractors, micrometers, scribes, or rulers.
- Conduct test runs with completed tools or dies to ensure that parts meet specifications, making adjustments as necessary.
- Design jigs, fixtures, and templates for use as work aids in the fabrication of parts or products.
- Cut, shape, and trim blanks or blocks to specified lengths or shapes, using power saws, power shears, rules, and hand tools.
- Set up and operate drill presses to drill and tap holes in parts for assembly.
- Develop and design new tools and dies, using computer-aided design software.
- Set pyrometer controls of heat-treating furnaces and feed or place parts, tools, or assemblies into furnaces to harden.
- Smooth and polish flat and contoured surfaces of parts or tools, using scrapers, abrasive stones, files, emery cloths, or power grinders.
- File, grind, shim, and adjust different parts to properly fit them together.
- Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools.
- Wash grit from stone, using hoses.
- Verify quality of finished workpieces by inspecting them, comparing them to templates, measuring their dimensions, or testing them in working machinery.
- Measure and mark equipment, objects, or parts to ensure grinding and polishing standards are met.
- Trim, scrape, or deburr objects or parts, using chisels, scrapers, and other hand tools and equipment.
- Mark defects, such as knotholes, cracks, and splits, for repair.
- Study blueprints or layouts to determine how to lay out workpieces or saw out templates.
- Move controls to adjust, start, or stop equipment during grinding and polishing processes.
- Load and adjust workpieces onto equipment or work tables, using hand tools.
- Repair and maintain equipment, objects, or parts, using hand tools.
- Select files or other abrasives, according to materials, sizes and shapes of workpieces, amount of stock to be removed, finishes specified, and steps in finishing processes.
- File grooved, contoured, and irregular surfaces of metal objects, such as metalworking dies and machine parts, to conform to templates, other parts, layouts, or blueprint specifications.
- Sharpen abrasive grinding tools, using machines and hand tools.
- Transfer equipment, objects, or parts to specified work areas, using moving devices.
- Remove completed workpieces from equipment or work tables, using hand tools, and place workpieces in containers.
- Record product and processing data on specified forms.
- Apply solutions and chemicals to equipment, objects, or parts, using hand tools.
- Clean brass particles from files by drawing file cards through file grooves.
- Grind, sand, clean, or polish objects or parts to correct defects or to prepare surfaces for further finishing, using hand tools and power tools.
- Wash grit from stone, using hoses.
- Clean and paint completed tires.
- Buff tires according to specifications for width and undertread depth.
- Build semi-raw rubber treads onto buffed tire casings to prepare tires for vulcanization in recapping or retreading processes.
- Trim excess rubber and imperfections during retreading processes.
- Fill cuts and holes in tires, using hot rubber.
- Place tires into molds for new tread.
- Fit inner tubes and final layers of rubber onto tires.
- Brush or spray solvents onto plies to ensure adhesion, and repeat process as specified, alternating direction of each ply to strengthen tires.
- Start rollers that bond tread and plies as drums revolve.
- Align treads with guides, start drums to wind treads onto plies, and slice ends.
- Roll camelbacks onto casings by hand, and cut camelbacks, using knives.
- Inspect worn tires for faults, cracks, cuts, and nail holes, and to determine if tires are suitable for retreading.
- Measure tires to determine mold size requirements.
- Roll hand rollers over rebuilt casings, exerting pressure to ensure adhesion between camelbacks and casings.
- Position ply stitcher rollers and drums according to width of stock, using hand tools and gauges.
- Cut plies at splice points, and press ends together to form continuous bands.
- Activate bead setters that press prefabricated beads onto plies.
- Depress pedals to rotate drums, and wind specified numbers of plies around drums to form tire bodies.
- Rub cement sticks on drum edges to provide adhesive surfaces for plies.
- Position rollers that turn ply edges under and over beads, or use steel rods to turn ply edges.
- Depress pedals to collapse drums after processing is complete.
- Wind chafers and breakers onto plies.
- Pull plies from supply racks, and align plies with edges of drums.
- Clean and paint completed tires.
- Buff tires according to specifications for width and undertread depth.
- Clean, finish, and lubricate molds and mold parts.
- Smooth surfaces of molds, using scraping tools or sandpaper.
- Read work orders or examine parts to determine parts or sections of products to be produced.
- Trim or remove excess material, using scrapers, knives, or band saws.
- Brush or spray mold surfaces with parting agents or insert paper into molds to ensure smoothness and prevent sticking or seepage.
- Engrave or stamp identifying symbols, letters, or numbers on products.
- Assemble, insert, and adjust wires, tubes, cores, fittings, rods, or patterns into molds, using hand tools and depth gauges.
- Separate models or patterns from molds and examine products for accuracy.
- Set the proper operating temperature for each casting.
- Load or stack filled molds in ovens, dryers, or curing boxes, or on storage racks or carts.
- Align and assemble parts to produce completed products, using gauges and hand tools.
- Operate and adjust controls of heating equipment to melt material or to cure, dry, or bake filled molds.
- Select sizes and types of molds according to instructions.
- Patch broken edges or fractures, using clay or plaster.
- Withdraw cores or other loose mold members after castings solidify.
- Repair mold defects, such as cracks or broken edges, using patterns, mold boxes, or hand tools.
- Measure and cut products to specified dimensions, using measuring and cutting instruments.
- Measure ingredients and mix molding, casting material, or sealing compounds to prescribed consistencies, according to formulas.
- Remove excess materials and level and smooth wet mold mixtures.
- Operate molding machines that compact sand in flasks to form molds.
- Place forms around models and separately immerse each half portion of a model in plaster, wax, or other mold-making materials.
- Verify dimensions of products, using measuring instruments, such as calipers, vernier gauges, or protractors.
- Bore holes or cut grates, risers, or pouring spouts in molds, using power tools.
- Locate and scribe parting lines on patterns, using measuring instruments, such as calipers, squares, or depth gauges.
- Tap or tilt molds to ensure uniform distribution of materials.
- Construct or form molds for use in casting clay or plaster objects, using plaster, fiberglass, rubber, casting machines, patterns, or flasks.
- Pour, pack, spread, or press plaster, concrete, or other materials into or around models or molds.
- Clean, finish, and lubricate molds and mold parts.
- Smooth surfaces of molds, using scraping tools or sandpaper.
- Buff and wax the finished paintwork.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Dispose of hazardous waste in an appropriate manner.
- Hold or position spray guns to direct spray onto articles.
- Spray prepared surfaces with specified amounts of primers and decorative or finish coatings.
- Monitor painting operations to identify flaws, such as blisters or streaks, and correct their causes.
- Disassemble, clean, and reassemble sprayers or power equipment, using solvents, wire brushes, and cloths.
- Fill hoppers, reservoirs, troughs, or pans with material used to coat, paint, or spray, using conveyors or pails.
- Clean equipment and work areas.
- Apply rust-resistant undercoats and caulk and seal seams.
- Start and stop operation of machines, using levers or buttons.
- Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers.
- Attach hoses or nozzles to machines, using wrenches and pliers, and make adjustments to obtain the proper dispersion of spray.
- Turn dials, handwheels, valves, or switches to regulate conveyor speeds, machine temperature, air pressure and circulation, and the flow or spray of coatings or paints.
- Observe machine gauges and equipment operation to detect defects or deviations from standards, and make adjustments as necessary.
- Examine, measure, weigh, or test sample products to ensure conformance to specifications.
- Use brush to hand-paint areas in need of retouching or unreachable with a spray gun.
- Thread or feed items or products through or around machine rollers and dryers.
- Weigh or measure chemicals, coatings, or paints before adding them to machines.
- Operate auxiliary machines or equipment used in coating or painting processes.
- Remove materials, parts, or workpieces from painting or coating machines, using hand tools.
- Record operational data on specified forms.
- Operate lifting or moving devices to move equipment or materials to access areas to be painted.
- Prepare and apply stencils, computer-generated decals, or other decorative items to finished products.
- Set up portable equipment, such as ventilators, exhaust units, ladders, or scaffolding.
- Adjust controls on infrared ovens, heat lamps, portable ventilators, or exhaust units to speed the drying of surfaces between coats.
- Apply primer over any repairs made to surfaces.
- Mix paints to match color specifications or original colors, stirring or thinning paints, using spatulas or power mixing equipment.
- Remove grease, dirt, paint, or rust from surfaces in preparation for paint application, using abrasives, solvents, brushes, blowtorches, washing tanks, or sandblasters.
- Sand and apply sealer to properly dried finish.
- Buff and wax the finished paintwork.
- Fill small dents or scratches with body fillers and smooth surfaces to prepare for painting.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Inspect, test, and adjust completed units to ensure that units meet specifications, tolerances, and customer order requirements.
- Position, align, and adjust parts for proper fit and assembly.
- Assemble parts or units, and position, align, and fasten units to assemblies, subassemblies, or frames, using hand tools and power tools.
- Connect cables, tubes, and wiring, according to specifications.
- Measure parts to determine tolerances, using precision measuring instruments such as micrometers, calipers, and verniers.
- Read blueprints and specifications to determine component parts and assembly sequences of electromechanical units.
- Attach name plates and mark identifying information on parts.
- Disassemble units to replace parts or to crate them for shipping.
- File, lap, and buff parts to fit, using hand and power tools.
- Operate or tend automated assembling equipment, such as robotics and fixed automation equipment.
- Drill, tap, ream, countersink, and spot-face bolt holes in parts, using drill presses and portable power drills.
- Operate small cranes to transport or position large parts.
- Pack or fold insulation between panels.
- Clean and lubricate parts and subassemblies, using grease paddles or oilcans.
- Polish artificial limbs, braces, or supports, using grinding and buffing wheels.
- Drill and tap holes for rivets, and glue, weld, bolt, or rivet parts together to form prosthetic or orthotic devices.
- Read prescriptions or specifications to determine the type of product or device to be fabricated and the materials and tools required.
- Make orthotic or prosthetic devices, using materials such as thermoplastic and thermosetting materials, metal alloys and leather, and hand or power tools.
- Bend, form, and shape fabric or material to conform to prescribed contours of structural components.
- Construct or receive casts or impressions of patients' torsos or limbs for use as cutting and fabrication patterns.
- Repair, modify, or maintain medical supportive devices, such as artificial limbs, braces, or surgical supports, according to specifications.
- Cover or pad metal or plastic structures or devices, using coverings such as rubber, leather, felt, plastic, or fiberglass.
- Test medical supportive devices for proper alignment, movement, or biomechanical stability, using meters and alignment fixtures.
- Lay out and mark dimensions of parts, using templates and precision measuring instruments.
- Fit appliances onto patients, and make any necessary adjustments.
- Take patients' body or limb measurements for use in device construction.
- Instruct patients in use of prosthetic or orthotic devices.
- Service or repair machinery used in the fabrication of appliances.
- Mix pigments to match patients' skin coloring, according to formulas, and apply mixtures to orthotic or prosthetic devices.
- Polish artificial limbs, braces, or supports, using grinding and buffing wheels.
- Clean and finish patterns or templates, using emery cloths, files, scrapers, and power grinders.
- Verify conformance of patterns or template dimensions to specifications, using measuring instruments such as calipers, scales, and micrometers.
- Set up and operate machine tools, such as milling machines, lathes, drill presses, and grinders, to machine castings or patterns.
- Repair and rework templates and patterns.
- Assemble pattern sections, using hand tools, bolts, screws, rivets, glue, or welding equipment.
- Read and interpret blueprints or drawings of parts to be cast or patterns to be made, compute dimensions, and plan operational sequences.
- Construct platforms, fixtures, and jigs for holding and placing patterns.
- Mark identification numbers or symbols onto patterns or templates.
- Program computerized numerical control machine tools.
- Create computer models of patterns or parts, using modeling software.
- Design and create templates, patterns, or coreboxes according to work orders, sample parts, or mockups.
- Lay out and draw or scribe patterns onto material, using compasses, protractors, rulers, scribes, or other instruments.
- Paint or lacquer patterns.
- Select pattern materials such as wood, resin, and fiberglass.
- Apply plastic-impregnated fabrics or coats of sealing wax or lacquer to patterns used to produce plastic.
- Clean and finish patterns or templates, using emery cloths, files, scrapers, and power grinders.
- Demagnetize mechanisms, using demagnetizing machines.
- Clean, rinse, and dry timepiece parts, using solutions and ultrasonic or mechanical watch-cleaning machines.
- Adjust timing regulators, using truing calipers, watch-rate recorders, and tweezers.
- Reassemble timepieces, replacing glass faces and batteries, before returning them to customers.
- Disassemble timepieces and inspect them for defective, worn, misaligned, or rusty parts, using loupes.
- Oil moving parts of timepieces.
- Estimate repair costs and timepiece values.
- Repair or replace broken, damaged, or worn parts on timepieces, using lathes, drill presses, and hand tools.
- Test timepiece accuracy and performance, using meters and other electronic instruments.
- Perform regular adjustment and maintenance on timepieces, watch cases, and watch bands.
- Order supplies, including replacement parts, for timing instruments.
- Gather information from customers about a timepiece's problems and its service history.
- Test and replace batteries and other electronic components.
- Record quantities and types of timepieces repaired, serial and model numbers of items, work performed, and charges for repairs.
- Fabricate parts for watches and clocks, using small lathes and other machines.
- Demagnetize mechanisms, using demagnetizing machines.
- Smooth surfaces of carvings, using rubbing stones.
- Verify depths and dimensions of cuts or carvings to ensure adherence to specifications, blueprints, or models, using measuring instruments.
- Move fingers over surfaces of carvings to ensure smoothness of finish.
- Shape, trim, or touch up roughed-out designs with appropriate tools to finish carvings.
- Lay out designs or dimensions from sketches or blueprints on stone surfaces, freehand or by transferring them from tracing paper, using scribes or chalk and measuring instruments.
- Cut, shape, and finish rough blocks of building or monumental stone, according to diagrams or patterns.
- Drill holes and cut or carve moldings and grooves in stone, according to diagrams and patterns.
- Select chisels, pneumatic or surfacing tools, or sandblasting nozzles, and determine sequence of use.
- Study artistic objects or graphic materials, such as models, sketches, or blueprints, to plan carving or cutting techniques.
- Carve designs or figures in full or bas relief on stone, employing knowledge of stone carving techniques and sense of artistry to produce carvings consistent with designers' plans.
- Carve rough designs freehand or by chipping along marks on stone, using mallets and chisels or pneumatic tools.
- Guide nozzles over stone, following stencil outlines, or chip along marks to create designs or to work surfaces down to specified finishes.
- Load sandblasting equipment with abrasives, attach nozzles to hoses, and turn valves to admit compressed air and activate jets.
- Dress stone surfaces, using bushhammers.
- Remove or add stencils during blasting to create differing cut depths, intricate designs, or rough, pitted finishes.
- Copy drawings on rough clay or plaster models.
- Smooth surfaces of carvings, using rubbing stones.
- Remove excess metal or porcelain and polish surfaces of prostheses or frameworks, using polishing machines.
- Read prescriptions or specifications and examine models or impressions to determine the design of dental products to be constructed.
- Test appliances for conformance to specifications and accuracy of occlusion, using articulators and micrometers.
- Fabricate, alter, or repair dental devices, such as dentures, crowns, bridges, inlays, or appliances for straightening teeth.
- Place tooth models on an apparatus that mimics bite and movement of patient's jaw to evaluate functionality of model.
- Train or supervise other dental technicians or dental laboratory bench workers.
- Melt metals or mix plaster, porcelain, or acrylic pastes and pour materials into molds or over frameworks to form dental prostheses or apparatuses.
- Prepare metal surfaces for bonding with porcelain to create artificial teeth, using small hand tools.
- Rebuild or replace linings, wire sections, or missing teeth to repair dentures.
- Apply porcelain paste or wax over prosthesis frameworks or setups, using brushes and spatulas.
- Build and shape wax teeth, using small hand instruments and information from observations or dentists' specifications.
- Load newly constructed teeth into porcelain furnaces to bake the porcelain onto the metal framework.
- Mold wax over denture setups to form the full contours of artificial gums.
- Create a model of patient's mouth by pouring plaster into a dental impression and allowing plaster to set.
- Prepare wax bite blocks and impression trays for use.
- Shape and solder wire and metal frames or bands for dental products, using soldering irons and hand tools.
- Fill chipped or low spots in surfaces of devices, using acrylic resins.
- Remove excess metal or porcelain and polish surfaces of prostheses or frameworks, using polishing machines.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Read and interpret schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions.
- Assemble electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment.
- Adjust, repair, or replace electrical or electronic components to correct defects and to ensure conformance to specifications.
- Position, align, or adjust workpieces or electrical parts to facilitate wiring or assembly.
- Explain assembly procedures or techniques to other workers.
- Drill or tap holes in specified equipment locations to mount control units or to provide openings for elements, wiring, or instruments.
- Fabricate or form parts, coils, or structures according to specifications, using drills, calipers, cutters, or saws.
- Confer with supervisors or engineers to plan or review work activities or to resolve production problems.
- Inspect or test wiring installations, assemblies, or circuits for resistance factors or for operation, and record results.
- Mark and tag components so that stock inventory can be tracked and identified.
- Measure and adjust voltages to specified values to determine operational accuracy of instruments.
- Complete, review, or maintain production, time, or component waste reports.
- Distribute materials, supplies, or subassemblies to work areas.
- Pack finished assemblies for shipment, and transport them to storage areas, using hoists or handtrucks.
- Instruct customers in the installation, repair, or maintenance of products.
- Paint structures as specified, using paint sprayers.
- Clean parts, using cleaning solutions, air hoses, and cloths.
- Clean and lubricate timepiece parts and assemblies, using solvents, buff sticks, and oil.
- Assemble and install components of timepieces to complete mechanisms, using watchmakers' tools and loupes.
- Observe operation of timepiece parts and subassemblies to determine accuracy of movement, and to diagnose causes of defects.
- Test operation and fit of timepiece parts and subassemblies, using electronic testing equipment, tweezers, watchmakers' tools, and loupes.
- Replace specified parts to repair malfunctioning timepieces, using watchmakers' tools, loupes, and holding fixtures.
- Disassemble timepieces such as watches, clocks, and chronometers so that repairs can be made.
- Examine components of timepieces such as watches, clocks, or chronometers for defects, using loupes or microscopes.
- Bend parts, such as hairsprings, pallets, barrel covers, and bridges, to correct deficiencies in truing or endshake, using tweezers.
- Change timing weights on balance wheels to correct deficient timing.
- Adjust sizes or positioning of timepiece parts to achieve specified fit or function, using calipers, fixtures, and loupes.
- Mount hairsprings and balance wheel assemblies between jaws of truing calipers.
- Estimate spaces between collets and first inner coils to determine if spaces are within acceptable limits.
- Bend inner coils of springs away from or toward collets, using tweezers, to locate centers of collets in centers of springs, and to correct errors resulting from faulty colleting of coils.
- Turn wheels of calipers and examine springs, using loupes, to determine if center coils appear as perfect circles.
- Examine and adjust hairspring assemblies to ensure horizontal and circular alignment of hairsprings, using calipers, loupes, and watchmakers' tools.
- Review blueprints, sketches, or work orders to gather information about tasks to be completed.
- Tighten or replace loose jewels, using watchmakers' tools.
- Clean and lubricate timepiece parts and assemblies, using solvents, buff sticks, and oil.
- Polish aircraft exteriors.
- Apply de-icing fluid to aircraft from baskets lifted by truck-mounted cranes.
- Change aircraft oil, coolant, or other fluids.
- Clean aircraft interiors by picking up waste, wiping down windows, or vacuuming.
- Climb ladders to reach aircraft surfaces to be cleaned.
- Complete forms describing tasks completed.
- De-grease aircraft exteriors.
- Empty aircraft lavatory systems or refill them with sanitizer fluid.
- Guide aircraft to designated areas using hand signals, batons, or other methods.
- Inspect aircraft components to locate cracks, breaks, leaks, or other problems.
- Load baggage or cargo for crew or passengers.
- Mix cleaning compounds or solutions.
- Radio to flight dispatchers or other personnel to discuss incoming or outgoing aircraft.
- Refill aircraft potable water tanks.
- Refuel aircraft using hoses connected to fuel trucks.
- Remove exhaust stains from aircraft using cleaning fluids.
- Tow aircraft to gates or hangars using tugs, tractors, or other vehicles.
- Wash the aircraft exteriors using lifts, cranes, detergent, or other equipment.
- Polish aircraft exteriors.
- Check for and remove moisture or contamination in damaged areas and keep areas dry until repairs are complete.
- Prime all scratches on pinchwelds with primer and allow to dry.
- Remove all dirt, foreign matter, and loose glass from damaged areas, apply primer along windshield or window edges, and allow primer to dry.
- Allow all glass parts installed with urethane ample time to cure, taking temperature and humidity into account.
- Apply a bead of urethane around the perimeter of each pinchweld and dress the remaining urethane on the pinchwelds so that it is of uniform level and thickness.
- Select appropriate tools, safety equipment, and parts, according to job requirements.
- Install replacement glass in vehicles.
- Obtain windshields or windows for specific automobile makes and models from stock and examine them for defects prior to installation.
- Replace all moldings, clips, windshield wipers, or other parts that were removed prior to glass replacement or repair.
- Remove broken or damaged glass windshields or window glass from motor vehicles, using hand tools to remove screws from frames holding glass.
- Remove moldings, clips, windshield wipers, screws, bolts, and inside A-pillar moldings and lower headliners in preparation for installation or repair work.
- Install, repair, or replace safety glass and related materials, such as back glass heating elements, on vehicles or equipment.
- Cool or warm glass in the event of temperature extremes.
- Replace or adjust motorized or manual window-raising mechanisms.
- Install new foam dams on pinchwelds, if required.
- Install rubber channeling strips around edges of glass or frames to weatherproof windows or to prevent rattling.
- Hold cut or uneven edges of glass against automated abrasive belts to shape or smooth edges.
- Cut flat safety glass according to specified patterns or perform precision pattern making and glass cutting to custom fit replacement windows.
- Check for and remove moisture or contamination in damaged areas and keep areas dry until repairs are complete.
- Clean, treat, buff, or polish finished items, using grinders, brushes, chisels, and cleaning solutions and polishing materials.
- Mark or discard items with defects such as spots, stains, scars, snags, chips, scratches, or unacceptable shapes or finishes.
- Trim excess material or cut threads off finished products, such as cutting loose ends of plastic off a manufactured toy for a smoother finish.
- Cut, shape, and trim materials, such as textiles, food, glass, stone, and metal, using knives, scissors, and other hand tools, portable power tools, or bench-mounted tools.
- Position templates or measure materials to locate specified points of cuts or to obtain maximum yields, using rules, scales, or patterns.
- Read work orders to determine dimensions, cutting locations, and quantities to cut.
- Mark cutting lines around patterns or templates, or follow layout points, using squares, rules, and straightedges, and chalk, pencils, or scribes.
- Mark identification numbers, trademarks, grades, marketing data, sizes, or model numbers on products.
- Unroll, lay out, attach, or mount materials or items on cutting tables or machines.
- Separate materials or products according to size, weight, type, condition, color, or shade.
- Fold or shape materials before or after cutting them.
- Replace or sharpen dulled cutting tools such as saws.
- Lower table-mounted cutters such as knife blades, cutting wheels, or saws to cut items to specified sizes.
- Stack cut items and load them on racks or conveyors or onto trucks.
- Adjust guides and stops to control depths and widths of cuts.
- Count or weigh and bundle items.
- Route items to provide cutouts for parts, using portable routers, grinders, and hand tools.
- Transport items to work or storage areas, using carts.
- Clean, treat, buff, or polish finished items, using grinders, brushes, chisels, and cleaning solutions and polishing materials.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Monitor machine cycles and mill operation to detect jamming and to ensure that products conform to specifications.
- Adjust and correct machine set-ups to reduce thicknesses, reshape products, and eliminate product defects.
- Start operation of rolling and milling machines to flatten, temper, form, and reduce sheet metal sections and to produce steel strips.
- Examine, inspect, and measure raw materials and finished products to verify conformance to specifications.
- Read rolling orders, blueprints, and mill schedules to determine setup specifications, work sequences, product dimensions, and installation procedures.
- Manipulate controls and observe dial indicators to monitor, adjust, and regulate speeds of machine mechanisms.
- Set distance points between rolls, guides, meters, and stops, according to specifications.
- Calculate draft space and roll speed for each mill stand to plan rolling sequences and specified dimensions and tempers.
- Install equipment such as guides, guards, gears, cooling equipment, and rolls, using hand tools.
- Position, align, and secure arbors, spindles, coils, mandrels, dies, and slitting knives.
- Fill oil cups, adjust valves, and observe gauges to control flow of metal coolants and lubricants onto workpieces.
- Activate shears and grinders to trim workpieces.
- Signal and assist other workers to remove and position equipment, fill hoppers, and feed materials into machines.
- Record mill production on schedule sheets.
- Direct and train other workers to change rolls, operate mill equipment, remove coils and cobbles, and band and load material.
- Thread or feed sheets or rods through rolling mechanisms, or start and control mechanisms that automatically feed steel into rollers.
- Select rolls, dies, roll stands, and chucks from data charts to form specified contours and to fabricate products.
- Disassemble sizing mills removed from rolling lines, and sort and store parts.
- Remove scratches and polish roll surfaces, using polishing stones and electric buffers.
- Place stones in clamps on polishing machines and polish facets of stones, using felt-covered or canvas-covered polishing wheels and polishing compounds such as tripoli and rouge.
- Examine gems during processing to ensure accuracy of angles and positions of cuts or bores, using magnifying glasses, loupes, or shadowgraphs.
- Assign polish, symmetry, and clarity grades to stones, according to established grading systems.
- Estimate wholesale and retail value of gems, following pricing guides, market fluctuations, and other relevant economic factors.
- Examine gem surfaces and internal structures, using polariscopes, refractometers, microscopes, and other optical instruments, to differentiate between stones, to identify rare specimens, or to detect flaws, defects, or peculiarities affecting gem values.
- Identify and document stones' clarity characteristics, using plot diagrams.
- Advise customers and others on the best use of gems to create attractive jewelry items.
- Examine diamonds or gems to ascertain the shape, cut, and width of cut stones, or to select the cuts that will result in the biggest, best quality stones.
- Immerse stones in prescribed chemical solutions to determine specific gravities and key properties of gemstones or substitutes.
- Hold stones, gems, dies, or styluses against rotating plates, wheels, saws, or slitters to cut, shape, slit, grind, or polish them.
- Sort rough diamonds into categories based on shape, size, color, and quality.
- Secure gems or diamonds in holders, chucks, dops, lapidary sticks, or blocks for cutting, polishing, grinding, drilling, or shaping.
- Locate and mark drilling or cutting positions on stones or dies, using diamond chips and power hand tools.
- Lap girdles on rough diamonds, using diamond girdling lathes.
- Measure sizes of stones' bore holes and cuts to ensure adherence to specifications, using precision measuring instruments.
- Select shaping wheels for tasks, and mix and apply abrasives, bort, or polishing compounds.
- Split gems along pre-marked lines to remove imperfections, using blades and jewelers' hammers.
- Regulate the speed of revolutions and reciprocating actions of drilling mechanisms.
- Replace, true, and sharpen blades, drills, and plates.
- Secure stones in metal mountings, using solder.
- Dismantle lapping, boring, cutting, polishing, and shaping equipment and machinery to clean and lubricate it.
- Regrind drill points, and advance drill cutting points according to specifications for channel depths and shapes.
- Place stones in clamps on polishing machines and polish facets of stones, using felt-covered or canvas-covered polishing wheels and polishing compounds such as tripoli and rouge.
- Dye, soak, polish, paint, stamp, stitch, stain, buff, or engrave leather or other materials to obtain desired effects, decorations, or shapes.
- Cut out parts, following patterns or outlines, using knives, shears, scissors, or machine presses.
- Construct, decorate, or repair leather products according to specifications, using sewing machines, needles and thread, leather lacing, glue, clamps, hand tools, or rivets.
- Repair and recondition leather products such as trunks, luggage, shoes, saddles, belts, purses, and baseball gloves.
- Align and stitch or glue materials such as fabric, fleece, leather, or wood, to join parts.
- Inspect articles for defects, and remove damaged or worn parts, using hand tools.
- Drill or punch holes and insert or attach metal rings, handles, and fastening hardware, such as buckles.
- Prepare inserts, heel pads, and lifts from casts of customers' feet.
- Dress and otherwise finish boots or shoes, as by trimming the edges of new soles and heels to the shoe shape.
- Attach insoles to shoe lasts, affix shoe uppers, and apply heels and outsoles.
- Cement, nail, or sew soles and heels to shoes.
- Check the texture, color, and strength of leather to ensure that it is adequate for a particular purpose.
- Shape shoe heels with a knife, and sand them on a buffing wheel for smoothness.
- Place shoes on lasts to remove soles and heels, using knives or pliers.
- Repair or replace soles, heels, and other parts of footwear, using sewing, buffing and other shoe repair machines, materials, and equipment.
- Cut, insert, position, and secure paddings, cushioning, or linings, using stitches or glue.
- Estimate the costs of requested products or services such as custom footwear or footwear repair, and receive payment from customers.
- Draw patterns, using measurements, designs, plaster casts, or customer specifications, and position or outline patterns on work pieces.
- Nail heel and toe cleats onto shoes.
- Re-sew seams, and replace handles and linings of suitcases or handbags.
- Stretch shoes, dampening parts and inserting and twisting parts, using an adjustable stretcher.
- Read prescriptions or specifications, and take measurements to establish the type of product to be made, using calipers, tape measures, or rules.
- Attach accessories or ornamentation to decorate or protect products.
- Make, modify, and repair orthopedic or therapeutic footwear according to doctors' prescriptions, or modify existing footwear for people with foot problems and special needs.
- Select materials and patterns, and trace patterns onto materials to be cut out.
- Measure customers for fit, and discuss with them the type of footwear to be made, recommending details such as leather quality.
- Clean and polish shoes.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
- Operate safety equipment and use safe work habits.
- Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
- Weld components in flat, vertical, or overhead positions.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
- Align and clamp workpieces together, using rules, squares, or hand tools, or position items in fixtures, jigs, or vises.
- Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
- Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
- Melt and apply solder along adjoining edges of workpieces to solder joints, using soldering irons, gas torches, or electric-ultrasonic equipment.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Grind, cut, buff, or bend edges of workpieces to be joined to ensure snug fit, using power grinders and hand tools.
- Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
- Hammer out bulges or bends in metal workpieces.
- Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
- Melt and apply solder to fill holes, indentations, or seams of fabricated metal products, using soldering equipment.
- Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
- Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
- Use fire suppression methods in industrial emergencies.
- Preheat workpieces prior to welding or bending, using torches or heating furnaces.
- Set up and use ladders and scaffolding as necessary to complete work.
- Operate metal shaping, straightening, and bending machines, such as brakes and shears.
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and operations.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
- Wash work areas, machines, equipment, vehicles, or products.
- Load and unload items from machines, conveyors, and conveyances.
- Operate machinery used in the production process, or assist machine operators.
- Place products in equipment or on work surfaces for further processing, inspecting, or wrapping.
- Examine products to verify conformance to quality standards.
- Start machines or equipment to begin production processes.
- Observe equipment operations so that malfunctions can be detected, and notify operators of any malfunctions.
- Remove products, machine attachments, or waste material from machines.
- Lift raw materials, finished products, and packed items, manually or using hoists.
- Transfer finished products, raw materials, tools, or equipment between storage and work areas of plants and warehouses, by hand or using hand trucks or powered lift trucks.
- Pack and store materials and products.
- Help production workers by performing duties of lesser skill, such as supplying or holding materials or tools, or cleaning work areas and equipment.
- Count finished products to determine if product orders are complete.
- Measure amounts of products, lengths of extruded articles, or weights of filled containers to ensure conformance to specifications.
- Separate products according to weight, grade, size, or composition of materials used to produce them.
- Turn valves to regulate flow of liquids or air, to reverse machines, to start pumps, or to regulate equipment.
- Mark or tag identification on parts.
- Dump materials such as prepared ingredients into machine hoppers prior to mixing.
- Mix ingredients according to specified procedures or formulas.
- Tie products in bundles for further processing or shipment, following prescribed procedures.
- Record information, such as the number of products tested, meter readings, or dates and times of product production.
- Read gauges or charts, and record data obtained.
- Unclamp and hoist full reels from braiding, winding, or other fabricating machines, using power hoists.
- Signal coworkers to direct them to move products during the production process.
- Clean and lubricate equipment.
- Prepare raw materials for processing.
- Perform minor repairs to machines, such as replacing damaged or worn parts.
- Change machine gears, using wrenches.
- Attach slings, ropes, or cables to objects such as pipes, hoses, or bundles.
- Position spouts or chutes of storage bins so that containers can be filled.
- Fold products and product parts during processing.
- Break up defective products for reprocessing.
- Thread ends of items such as thread, cloth, and lace through needles and rollers, and around take-up tubes.
- Cut or break flashing from materials or products.
- Wash work areas, machines, equipment, vehicles, or products.