- Clean and lubricate parts.
Occupations with related tasks Save Table: XLSX CSV
Closely Related Tasks | All Related Tasks | Job Zone | Code | Occupation |
6 | 7 | 3 | 49-2092.00 | Electric Motor, Power Tool, and Related Repairers |
4 | 4 | 3 | 49-3011.00 | Aircraft Mechanics and Service Technicians |
3 | 4 | 3 | 49-9043.00 | Maintenance Workers, Machinery
|
3 | 4 | 3 | 49-2022.00 | Telecommunications Equipment Installers and Repairers, Except Line Installers
|
3 | 3 | 2 | 49-9031.00 | Home Appliance Repairers |
3 | 3 | 3 | 49-9063.00 | Musical Instrument Repairers and Tuners |
3 | 3 | 3 | 49-9012.00 | Control and Valve Installers and Repairers, Except Mechanical Door |
2 | 4 | 3 | 49-3042.00 | Mobile Heavy Equipment Mechanics, Except Engines
|
2 | 3 | 3 | 49-9097.00 | Signal and Track Switch Repairers |
2 | 3 | 3 | 49-9064.00 | Watch and Clock Repairers |
2 | 3 | 2 | 49-9098.00 | Helpers--Installation, Maintenance, and Repair Workers |
2 | 3 | 3 | 49-9092.00 | Commercial Divers
|
2 | 2 | 2 | 49-9011.00 | Mechanical Door Repairers
|
1 | 5 | 3 | 49-9071.00 | Maintenance and Repair Workers, General
|
1 | 2 | 2 | 49-3053.00 | Outdoor Power Equipment and Other Small Engine Mechanics |
1 | 2 | 3 | 49-9041.00 | Industrial Machinery Mechanics
|
1 | 2 | 2 | 49-9091.00 | Coin, Vending, and Amusement Machine Servicers and Repairers |
1 | 2 | 3 | 49-2011.00 | Computer, Automated Teller, and Office Machine Repairers |
1 | 2 | 2 | 49-3093.00 | Tire Repairers and Changers |
1 | 1 | 3 | 49-2096.00 | Electronic Equipment Installers and Repairers, Motor Vehicles |
1 | 1 | 2 | 49-9096.00 | Riggers |
1 | 1 | 3 | 49-9061.00 | Camera and Photographic Equipment Repairers |
1 | 1 | 3 | 49-2095.00 | Electrical and Electronics Repairers, Powerhouse, Substation, and Relay |
1 | 1 | 3 | 19-4044.00 | Hydrologic Technicians |
1 | 1 | 2 | 49-9045.00 | Refractory Materials Repairers, Except Brickmasons |
1 | 1 | 3 | 49-9062.00 | Medical Equipment Repairers
|
1 | 1 | 2 | 49-3043.00 | Rail Car Repairers |
1 | 1 | 2 | 49-9052.00 | Telecommunications Line Installers and Repairers
|
1 | 1 | 2 | 49-9044.00 | Millwrights |
1 | 1 | 3 | 49-3031.00 | Bus and Truck Mechanics and Diesel Engine Specialists |
1 | 1 | 5 | 25-1042.00 | Biological Science Teachers, Postsecondary
|
- Lubricate moving parts.
- Scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.
- Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.
- Clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.
- Drain and filter transformer oil and refill transformers with oil until coils are submerged.
- Clean, rinse, and dry transformer cases, using boiling water, scrapers, solvents, hoses, and cloths.
- Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.
- Inspect and test equipment to locate damage or worn parts and diagnose malfunctions, or read work orders or schematic drawings to determine required repairs.
- Reassemble repaired electric motors to specified requirements and ratings, using hand tools and electrical meters.
- Measure velocity, horsepower, revolutions per minute (rpm), amperage, circuitry, and voltage of units or parts to diagnose problems, using ammeters, voltmeters, wattmeters, and other testing devices.
- Repair and rebuild defective mechanical parts in electric motors, generators, and related equipment, using hand tools and power tools.
- Lift units or parts such as motors or generators, using cranes or chain hoists, or signal crane operators to lift heavy parts or subassemblies.
- Record repairs required, parts used, and labor time.
- Disassemble defective equipment so that repairs can be made, using hand tools.
- Adjust working parts, such as fan belts, contacts, and springs, using hand tools and gauges.
- Read service guides to find information needed to perform repairs.
- Inspect electrical connections, wiring, relays, charging resistance boxes, and storage batteries, following wiring diagrams.
- Weld, braze, or solder electrical connections.
- Verify and adjust alignments and dimensions of parts, using gauges and tracing lathes.
- Set machinery for proper performance, using computers.
- Test equipment for overheating, using speed gauges and thermometers.
- Reface, ream, and polish commutators and machine parts to specified tolerances, using machine tools.
- Maintain stocks of parts.
- Cut and form insulation, and insert insulation into armature, rotor, or stator slots.
- Assemble electrical parts such as alternators, generators, starting devices, and switches, following schematic drawings and using hand, machine, and power tools.
- Solder, wrap, and coat wires to ensure proper insulation.
- Rewire electrical systems, and repair or replace electrical accessories.
- Rewind coils on cores in slots, or make replacement coils, using coil-winding machines.
- Test conditions, fluid levels, and specific gravities of electrolyte cells, using voltmeters, hydrometers, and thermometers.
- Add water or acid to battery cell solutions to obtain specified concentrations.
- Pour compounds into transformer-case terminal openings to seal out moisture.
- Remove and replace defective parts such as coil leads, carbon brushes, and wires, using soldering equipment.
- Hammer out dents and twists in tools and equipment.
- Seal joints with putty, mortar, and asbestos, using putty extruders and knives.
- Repair and operate battery-charging equipment.
- Inspect batteries for structural defects such as dented cans, damaged carbon rods and terminals, and defective seals.
- Test battery charges, and replace or recharge batteries as necessary.
- Bolt porcelain insulators to wood parts to assemble hot stools.
- Position and level battery cells, anodes, or cathodes, using hoists or leveling jacks, or signal other workers to perform positioning and leveling.
- Lubricate moving parts.
- Scrape and clean units or parts, using cleaning solvents and equipment such as buffing wheels.
- Steam-clean polishing and buffing wheels to remove abrasives and bonding materials, and spray, brush, or recoat surfaces as necessary.
- Clean cells, cell assemblies, glassware, leads, electrical connections, and battery poles, using scrapers, steam, water, emery cloths, power grinders, or acid.
- Drain and filter transformer oil and refill transformers with oil until coils are submerged.
- Clean, rinse, and dry transformer cases, using boiling water, scrapers, solvents, hoses, and cloths.
- Sharpen tools such as saws, picks, shovels, screwdrivers, and scoops, either manually or by using bench grinders and emery wheels.
- Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts.
- Clean, refuel, and change oil in line service aircraft.
- Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.
- Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.
- Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problems.
- Conduct routine and special inspections as required by regulations.
- Inspect completed work to certify that maintenance meets standards and that aircraft are ready for operation.
- Read and interpret maintenance manuals, service bulletins, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.
- Maintain repair logs, documenting all preventive and corrective aircraft maintenance.
- Modify aircraft structures, space vehicles, systems, or components, following drawings, schematics, charts, engineering orders, and technical publications.
- Inspect airframes for wear or other defects.
- Measure parts for wear, using precision instruments.
- Obtain fuel and oil samples and check them for contamination.
- Maintain, repair, and rebuild aircraft structures, functional components, and parts, such as wings and fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets, or seals.
- Replace or repair worn, defective, or damaged components, using hand tools, gauges, and testing equipment.
- Read and interpret pilots' descriptions of problems to diagnose causes.
- Test operation of engines and other systems, using test equipment, such as ignition analyzers, compression checkers, distributor timers, or ammeters.
- Measure the tension of control cables.
- Spread plastic film over areas to be repaired to prevent damage to surrounding areas.
- Remove or install aircraft engines, using hoists or forklift trucks.
- Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand or power tools.
- Locate and mark dimensions and reference lines on defective or replacement parts, using templates, scribes, compasses, and steel rules.
- Fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders.
- Reassemble engines following repair or inspection and reinstall engines in aircraft.
- Trim and shape replacement body sections to specified sizes and fits and secure sections in place, using adhesives, hand tools, and power tools.
- Accompany aircraft on flights to make in-flight adjustments and corrections.
- Remove or cut out defective parts or drill holes to gain access to internal defects or damage, using drills and punches.
- Install and align repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches.
- Inventory and requisition or order supplies, parts, materials, and equipment.
- Communicate with other workers to coordinate fitting and alignment of heavy parts, or to facilitate processing of repair parts.
- Examine engines through specially designed openings while working from ladders or scaffolds, or use hoists or lifts to remove the entire engine from an aircraft.
- Check for corrosion, distortion, and invisible cracks in the fuselage, wings, and tail, using x-ray and magnetic inspection equipment.
- Disassemble engines and inspect parts, such as turbine blades or cylinders, for corrosion, wear, warping, cracks, and leaks, using precision measuring instruments, x-rays, and magnetic inspection equipment.
- Cure bonded structures, using portable or stationary curing equipment.
- Listen to operating engines to detect and diagnose malfunctions, such as sticking or burned valves.
- Determine repair limits for engine hot section parts.
- Remove, inspect, repair, and install in-flight refueling stores and external fuel tanks.
- Prepare and paint aircraft surfaces.
- Service and maintain aircraft and related apparatus by performing activities such as flushing crankcases, cleaning screens, and or moving parts.
- Clean, refuel, and change oil in line service aircraft.
- Clean, strip, prime, and sand structural surfaces and materials to prepare them for bonding.
- Clean engines, sediment bulk and screens, and carburetors, adjusting carburetor float levels.
- Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specified procedures.
- Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.
- Remove hardened material from machines or machine parts, using abrasives, power and hand tools, jackhammers, sledgehammers, or other equipment.
- Collect and discard worn machine parts and other refuse to maintain machinery and work areas.
- Start machines and observe mechanical operation to determine efficiency and to detect problems.
- Read work orders and specifications to determine machines and equipment requiring repair or maintenance.
- Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.
- Reassemble machines after the completion of repair or maintenance work.
- Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.
- Install, replace, or change machine parts and attachments, according to production specifications.
- Collaborate with other workers to repair or move machines, machine parts, or equipment.
- Inventory and requisition machine parts, equipment, and other supplies so that stock can be maintained and replenished.
- Record production, repair, and machine maintenance information.
- Set up and operate machines, and adjust controls to regulate operations.
- Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies.
- Replace, empty, or replenish machine and equipment containers such as gas tanks or boxes.
- Replace or repair metal, wood, leather, glass, or other lining in machines, or in equipment compartments or containers.
- Measure, mix, prepare, and test chemical solutions used to clean or repair machinery and equipment.
- Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specified procedures.
- Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment.
- Remove hardened material from machines or machine parts, using abrasives, power and hand tools, jackhammers, sledgehammers, or other equipment.
- Collect and discard worn machine parts and other refuse to maintain machinery and work areas.
- Clean and maintain tools, test equipment, and motor vehicles.
- Perform routine maintenance on equipment, including adjusting and lubricating components and painting worn or exposed areas.
- Clean switches and replace contact points, using vacuum hoses, solvents, and hand tools.
- Remove loose wires and other debris after work is completed.
- Demonstrate equipment to customers and explain its use, responding to any inquiries or complaints.
- Test circuits and components of malfunctioning telecommunications equipment to isolate sources of malfunctions, using test meters, circuit diagrams, polarity probes, and other hand tools.
- Test repaired, newly installed, or updated equipment to ensure that it functions properly and conforms to specifications, using test equipment and observation.
- Climb poles and ladders, use truck-mounted booms, and enter areas such as manholes and cable vaults to install, maintain, or inspect equipment.
- Assemble and install communication equipment such as data and telephone communication lines, wiring, switching equipment, wiring frames, power apparatus, computer systems, and networks.
- Run wires between components and to outside cable systems, connecting them to wires from telephone poles or underground cable accesses.
- Test connections to ensure that power supplies are adequate and that communications links function.
- Note differences in wire and cable colors so that work can be performed correctly.
- Inspect equipment on a regular basis to ensure proper functioning.
- Collaborate with other workers to locate and correct malfunctions.
- Repair or replace faulty equipment, such as defective and damaged telephones, wires, switching system components, and associated equipment.
- Maintain computer and manual records pertaining to facilities and equipment.
- Communicate with bases, using telephones or two-way radios to receive instructions or technical advice, or to report equipment status.
- Remove and remake connections to change circuit layouts, following work orders or diagrams.
- Perform database verifications, using computers.
- Request support from technical service centers when on-site procedures fail to solve installation or maintenance problems.
- Analyze test readings, computer printouts, and trouble reports to determine equipment repair needs and required repair methods.
- Adjust or modify equipment to enhance equipment performance or to respond to customer requests.
- Remove and replace plug-in circuit equipment.
- Refer to manufacturers' manuals to obtain maintenance instructions pertaining to specific malfunctions.
- Dig holes or trenches as necessary for equipment installation and access.
- Review manufacturer's instructions, manuals, technical specifications, building permits, and ordinances to determine communication equipment requirements and procedures.
- Drive crew trucks to and from work areas.
- Route and connect cables and lines to switches, switchboard equipment, and distributing frames, using wire-wrap guns or soldering irons to connect wires to terminals.
- Designate cables available for use.
- Diagnose and correct problems from remote locations, using special switchboards to find the sources of problems.
- Program computerized switches and switchboards to provide requested features.
- Enter codes needed to correct electronic switching system programming.
- Examine telephone transmission facilities to determine requirements for new or additional telephone services.
- Measure distances from landmarks to identify exact installation sites for equipment.
- Install updated software and programs that maintain existing software or provide requested features, such as time-correlated call routing.
- Determine viability of sites through observation, and discuss site locations and construction requirements with customers.
- Install telephone station equipment, such as intercommunication systems, transmitters, receivers, relays, and ringers, and related apparatus, such as coin collectors, telephone booths, and switching-key equipment.
- Provide input into the design and manufacturing of new equipment.
- Address special issues or situations, such as illegal or unauthorized use of equipment, or cases of electrical or acoustic shock.
- Place intercept circuits on terminals to handle vacant lines in central office installations.
- Clean and maintain tools, test equipment, and motor vehicles.
- Perform routine maintenance on equipment, including adjusting and lubricating components and painting worn or exposed areas.
- Clean switches and replace contact points, using vacuum hoses, solvents, and hand tools.
- Remove loose wires and other debris after work is completed.
- Reassemble units after repairs are made, making adjustments and cleaning and lubricating parts as needed.
- Clean and reinstall parts.
- Clean, lubricate, and touch up minor defects on newly installed or repaired appliances.
- Bill customers for repair work, and collect payment.
- Observe and examine appliances during operation to detect specific malfunctions such as loose parts or leaking fluid.
- Talk to customers or refer to work orders to establish the nature of appliance malfunctions.
- Refer to schematic drawings, product manuals, and troubleshooting guides to diagnose and repair problems.
- Trace electrical circuits, following diagrams, and conduct tests with circuit testers and other equipment to locate shorts and grounds.
- Replace worn and defective parts such as switches, bearings, transmissions, belts, gears, circuit boards, or defective wiring.
- Provide repair cost estimates, and recommend whether appliance repair or replacement is a better choice.
- Disassemble appliances so that problems can be diagnosed and repairs can be made.
- Respond to emergency calls for problems such as gas leaks.
- Service and repair domestic electrical or gas appliances, such as clothes washers, refrigerators, stoves, and dryers.
- Record maintenance and repair work performed on appliances.
- Test and examine gas pipelines and equipment to locate leaks and faulty connections, and to determine the pressure and flow of gas.
- Light and adjust pilot lights on gas stoves, and examine valves and burners for gas leakage and specified flame.
- Instruct customers regarding operation and care of appliances, and provide information such as emergency service numbers.
- Contact supervisors or offices to receive repair assignments.
- Maintain stocks of parts used in on-site installation, maintenance, and repair of appliances.
- Level refrigerators, adjust doors, and connect water lines to water pipes for ice makers and water dispensers, using hand tools.
- Observe and test operation of appliances following installation, and make any initial installation adjustments that are necessary.
- Set appliance thermostats, and check to ensure that they are functioning properly.
- Install appliances such as refrigerators, washing machines, and stoves.
- Level washing machines and connect hoses to water pipes, using hand tools.
- Conserve, recover, and recycle refrigerants used in cooling systems.
- Install gas pipes and water lines to connect appliances to existing gas lines or plumbing.
- Take measurements to determine if appliances will fit in installation locations, performing minor carpentry work when necessary to ensure proper installation.
- Measure, cut, and thread pipe, and connect it to feeder lines and equipment or appliances, using rules and hand tools.
- Assemble new or reconditioned appliances.
- Disassemble and reinstall existing kitchen cabinets, or assemble and install prefabricated kitchen cabinets and trim in conjunction with appliance installation.
- Hang steel supports from beams or joists to hold hoses, vents, and gas pipes in place.
- Reassemble units after repairs are made, making adjustments and cleaning and lubricating parts as needed.
- Clean and reinstall parts.
- Clean, lubricate, and touch up minor defects on newly installed or repaired appliances.
- Reassemble instruments following repair, using hand tools and power tools and glue, hair, yarn, resin, or clamps, and lubricate instruments as necessary.
- Wash metal instruments in lacquer-stripping and cyanide solutions to remove lacquer and tarnish.
- Clean, sand, and paint parts of percussion instruments to maintain their condition.
- Play instruments to evaluate their sound quality and to locate any defects.
- Adjust string tensions to tune instruments, using hand tools and electronic tuning devices.
- Disassemble instruments and parts for repair and adjustment.
- Repair or replace musical instrument parts and components, such as strings, bridges, felts, and keys, using hand and power tools.
- Inspect instruments to locate defects, and to determine their value or the level of restoration required.
- Compare instrument pitches with tuning tool pitches to tune instruments.
- String instruments, and adjust trusses and bridges of instruments to obtain specified string tensions and heights.
- Polish instruments, using rags and polishing compounds, buffing wheels, or burnishing tools.
- Repair cracks in wood or metal instruments, using pinning wire, lathes, fillers, clamps, or soldering irons.
- Mix and measure glue that will be used for instrument repair.
- Shape old parts and replacement parts to improve tone or intonation, using hand tools, lathes, or soldering irons.
- Refinish instruments to protect and decorate them, using hand tools, buffing tools, and varnish.
- Make wood replacement parts, using woodworking machines and hand tools.
- Align pads and keys on reed or wind instruments.
- Solder posts and parts to hold them in their proper places.
- Remove dents and burrs from metal instruments, using mallets and burnishing tools.
- Test tubes and pickups in electronic amplifier units, and solder parts and connections as necessary.
- Adjust felt hammers on pianos to increase tonal mellowness or brilliance, using sanding paddles, lacquer, or needles.
- Remove irregularities from tuning pins, strings, and hammers of pianos, using wood blocks or filing tools.
- Strike wood, fiberglass, or metal bars of instruments, and use tuned blocks, stroboscopes, or electronic tuners to evaluate tones made by instruments.
- Assemble and install new pipe organs and pianos in buildings.
- Refinish and polish piano cabinets or cases to prepare them for sale.
- Deliver pianos to purchasers or to locations of their use.
- Remove drumheads by removing tension rods with drum keys and cutting tools.
- Place rim hoops back onto drum shells to allow new drumheads to dry and become taut.
- Solder or weld frames of mallet instruments and metal drum parts.
- Repair breaks in percussion instruments, such as drums and cymbals, using drill presses, power saws, glue, clamps, grinding wheels, or other hand tools.
- Cut new drumheads from animal skins, using scissors, and soak drumheads in water to make them pliable.
- Assemble bars onto percussion instruments.
- Stretch drumheads over rim hoops and tuck them around and under the hoops, using hand tucking tools.
- Cut out sections around cracks on percussion instruments to prevent cracks from advancing, using shears or grinding wheels.
- File metal reeds until their pitches correspond with standard tuning bar pitches.
- Replace xylophone bars and wheels.
- Remove material from bars of percussion instruments to obtain specified tones, using bandsaws, sanding machines, machine grinders, or hand files and scrapers.
- Reassemble instruments following repair, using hand tools and power tools and glue, hair, yarn, resin, or clamps, and lubricate instruments as necessary.
- Wash metal instruments in lacquer-stripping and cyanide solutions to remove lacquer and tarnish.
- Clean, sand, and paint parts of percussion instruments to maintain their condition.
- Lubricate wearing surfaces of mechanical parts, using oils or other lubricants.
- Clean internal compartments and moving parts, using rags and cleaning compounds.
- Clean plant growth, scale, paint, soil, or rust from meter housings, using wire brushes, scrapers, buffers, sandblasters, or cleaning compounds.
- Record maintenance information, including test results, material usage, and repairs made.
- Disassemble and repair mechanical control devices or valves, such as regulators, thermostats, or hydrants, using power tools, hand tools, and cutting torches.
- Calibrate instrumentation, such as meters, gauges, and regulators, for pressure, temperature, flow, and level.
- Install, inspect and test electric meters, relays, and power sources to detect causes of malfunctions and inaccuracies, using hand tools and testing equipment.
- Test valves and regulators for leaks and accurate temperature and pressure settings, using precision testing equipment.
- Record meter readings and installation data on meter cards, work orders, or field service orders, or enter data into hand-held computers.
- Turn meters on or off to establish or close service.
- Shut off service and notify repair crews when major repairs are required, such as the replacement of underground pipes or wiring.
- Install regulators and related equipment such as gas meters, odorization units, and gas pressure telemetering equipment.
- Cut seats to receive new orifices, tap inspection ports, and perform other repairs to salvage usable materials, using hand tools and machine tools.
- Turn valves to allow measured amounts of air or gas to pass through meters at specified flow rates.
- Report hazardous field situations and damaged or missing meters.
- Vary air pressure flowing into regulators and turn handles to assess functioning of valves and pistons.
- Examine valves or mechanical control device parts for defects, dents, or loose attachments, and mark malfunctioning areas of defective units.
- Mount and install meters and other electric equipment such as time clocks, transformers, and circuit breakers, using electricians' hand tools.
- Connect regulators to test stands, and turn screw adjustments until gauges indicate that inlet and outlet pressures meet specifications.
- Investigate instances of illegal tapping into service lines.
- Trace and tag meters or house lines.
- Repair electric meters and components, such as transformers and relays, and replace metering devices, dial glasses, and faulty or incorrect wiring, using hand tools.
- Replace defective parts, such as bellows, range springs, and toggle switches, and reassemble units according to blueprints, using cam presses and hand tools.
- Recondition displacement type gas meters and governors, fabricating, machining, or modifying parts needed for repairs.
- Measure tolerances of assembled and salvageable parts for conformance to standards or specifications, using gauges, micrometers, and calipers.
- Dismantle meters, and replace or adjust defective parts such as cases, shafts, gears, disks, and recording mechanisms, using soldering irons and hand tools.
- Disconnect or remove defective or unauthorized meters, using hand tools.
- Reassemble repaired equipment, and solder top, front, and back case panels in place, using soldering guns, power tools, and hand tools.
- Attach air hoses to meter inlets, plug outlets, and observe gauges for pressure losses to test internal seams for leaks.
- Make adjustments to meter components, such as setscrews or timing mechanisms, so that they conform to specifications.
- Recommend and write up specifications for changes in hardware, such as house wiring.
- Clamp regulator units into vises on stages above water tanks, and attach compressed air hoses to intake ports.
- Repair leaks in valve seats or bellows of automotive heater thermostats, using soft solder, flux, and acetylene torches.
- Collect money due on delinquent accounts.
- Splice and connect cables from meters or current transformers to pull boxes or switchboards, using hand tools.
- Attach pressurized meters to fixtures which submerge them in water, and observe meters for leaks.
- Advise customers on proper installation of valves or regulators and related equipment.
- Calibrate thermostats for specified temperature or pressure settings.
- Connect hoses from provers to meter inlets and outlets, and raise prover bells until prover gauges register zero.
- Lubricate wearing surfaces of mechanical parts, using oils or other lubricants.
- Clean internal compartments and moving parts, using rags and cleaning compounds.
- Clean plant growth, scale, paint, soil, or rust from meter housings, using wire brushes, scrapers, buffers, sandblasters, or cleaning compounds.
- Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
- Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.
- Adjust, maintain, and repair or replace subassemblies, such as transmissions and crawler heads, using hand tools, jacks, and cranes.
- Adjust and maintain industrial machinery, using control and regulating devices.
- Repair and replace damaged or worn parts.
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
- Operate and inspect machines or heavy equipment to diagnose defects.
- Read and understand operating manuals, blueprints, and technical drawings.
- Dismantle and reassemble heavy equipment using hoists and hand tools.
- Overhaul and test machines or equipment to ensure operating efficiency.
- Repair, rewire, and troubleshoot electrical systems.
- Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
- Examine parts for damage or excessive wear, using micrometers and gauges.
- Weld or solder broken parts and structural members, using electric or gas welders and soldering tools.
- Research, order, and maintain parts inventory for services and repairs.
- Fit bearings to adjust, repair, or overhaul mobile mechanical, hydraulic, and pneumatic equipment.
- Schedule maintenance for industrial machines and equipment, and keep equipment service records.
- Assemble gear systems, and align frames and gears.
- Fabricate needed parts or items from sheet metal.
- Direct workers who are assembling or disassembling equipment or cleaning parts.
- Clean, lubricate, and perform other routine maintenance work on equipment and vehicles.
- Clean parts by spraying them with grease solvent or immersing them in tanks of solvent.
- Adjust, maintain, and repair or replace subassemblies, such as transmissions and crawler heads, using hand tools, jacks, and cranes.
- Adjust and maintain industrial machinery, using control and regulating devices.
- Lubricate moving parts on gate-crossing mechanisms and swinging signals.
- Clean lenses of lamps with cloths and solvents.
- Install, inspect, maintain, and repair various railroad service equipment on the road or in the shop, including railroad signal systems.
- Inspect and test operation, mechanical parts, and circuitry of gate crossings, signals, and signal equipment such as interlocks and hotbox detectors.
- Inspect electrical units of railroad grade crossing gates and repair loose bolts and defective electrical connections and parts.
- Test and repair track circuits.
- Drive motor vehicles to job sites.
- Tighten loose bolts, using wrenches, and test circuits and connections by opening and closing gates.
- Inspect switch-controlling mechanisms on trolley wires and in track beds, using hand tools and test equipment.
- Replace defective wiring, broken lenses, or burned-out light bulbs.
- Inspect, maintain, and replace batteries as needed.
- Record and report information about mileage or track inspected, repairs performed, and equipment requiring replacement.
- Test air lines and air cylinders on pneumatically operated gates.
- Maintain high tension lines, de-energizing lines for power companies when repairs are requested.
- Lubricate moving parts on gate-crossing mechanisms and swinging signals.
- Clean lenses of lamps with cloths and solvents.
- Install, inspect, maintain, and repair various railroad service equipment on the road or in the shop, including railroad signal systems.
- Clean, rinse, and dry timepiece parts, using solutions and ultrasonic or mechanical watch-cleaning machines.
- Oil moving parts of timepieces.
- Perform regular adjustment and maintenance on timepieces, watch cases, and watch bands.
- Adjust timing regulators, using truing calipers, watch-rate recorders, and tweezers.
- Reassemble timepieces, replacing glass faces and batteries, before returning them to customers.
- Disassemble timepieces and inspect them for defective, worn, misaligned, or rusty parts, using loupes.
- Estimate repair costs and timepiece values.
- Repair or replace broken, damaged, or worn parts on timepieces, using lathes, drill presses, and hand tools.
- Test timepiece accuracy and performance, using meters and other electronic instruments.
- Order supplies, including replacement parts, for timing instruments.
- Gather information from customers about a timepiece's problems and its service history.
- Test and replace batteries and other electronic components.
- Record quantities and types of timepieces repaired, serial and model numbers of items, work performed, and charges for repairs.
- Demagnetize mechanisms, using demagnetizing machines.
- Fabricate parts for watches and clocks, using small lathes and other machines.
- Clean, rinse, and dry timepiece parts, using solutions and ultrasonic or mechanical watch-cleaning machines.
- Oil moving parts of timepieces.
- Perform regular adjustment and maintenance on timepieces, watch cases, and watch bands.
- Clean or lubricate vehicles, machinery, equipment, instruments, tools, work areas, and other objects, using hand tools, power tools, and cleaning equipment.
- Prepare work stations for use by mechanics and repairers.
- Adjust, maintain, and repair tools, equipment, and machines, and assist more skilled workers with similar tasks.
- Install or replace machinery, equipment, and new or replacement parts and instruments, using hand or power tools.
- Examine and test machinery, equipment, components, and parts for defects to ensure proper functioning.
- Tend and observe equipment and machinery to verify efficient and safe operation.
- Adjust, connect, or disconnect wiring, piping, tubing, and other parts, using hand or power tools.
- Diagnose electrical problems and install and rewire electrical components.
- Disassemble broken or defective equipment to facilitate repair and reassemble equipment when repairs are complete.
- Position vehicles, machinery, equipment, physical structures, and other objects for assembly or installation, using hand tools, power tools, and moving equipment.
- Transfer tools, parts, equipment, and supplies to and from work stations and other areas.
- Order new parts to maintain inventory.
- Apply protective materials to equipment, components, and parts to prevent defects and corrosion.
- Design, weld, and fabricate parts, using blueprints or other mechanical plans.
- Assemble and maintain physical structures, using hand or power tools.
- Hold or supply tools, parts, equipment, and supplies for other workers.
- Clean or lubricate vehicles, machinery, equipment, instruments, tools, work areas, and other objects, using hand tools, power tools, and cleaning equipment.
- Prepare work stations for use by mechanics and repairers.
- Adjust, maintain, and repair tools, equipment, and machines, and assist more skilled workers with similar tasks.
- Check and maintain diving equipment, such as helmets, masks, air tanks, harnesses, or gauges.
- Install, inspect, clean, or repair piping or valves.
- Remove rubbish or pollution from the sea.
- Take appropriate safety precautions, such as monitoring dive lengths and depths and registering with authorities before diving expeditions begin.
- Communicate with workers on the surface while underwater, using signal lines or telephones.
- Descend into water with the aid of diver helpers, using scuba gear or diving suits.
- Obtain information about diving tasks and environmental conditions.
- Supervise or train other divers, including hobby divers.
- Inspect the condition of underwater steel or wood structures.
- Inspect and test docks, ships, buoyage systems, plant intakes or outflows, or underwater pipelines, cables, or sewers, using closed circuit television, still photography, and testing equipment.
- Repair ships, bridge foundations, or other structures below the water line, using caulk, bolts, and hand tools.
- Recover objects by placing rigging around sunken objects, hooking rigging to crane lines, and operating winches, derricks, or cranes to raise objects.
- Operate underwater video, sonar, recording, or related equipment to investigate underwater structures or marine life.
- Take test samples or photographs to assess the condition of vessels or structures.
- Cut and weld steel, using underwater welding equipment, jigs, and supports.
- Carry out non-destructive testing, such as tests for cracks on the legs of oil rigs at sea.
- Install pilings or footings for piers or bridges.
- Salvage wrecked ships or their cargo, using pneumatic power velocity and hydraulic tools and explosive charges, when necessary.
- Remove obstructions from strainers or marine railway or launching ways, using pneumatic or power hand tools.
- Set or guide placement of pilings or sandbags to provide support for structures, such as docks, bridges, cofferdams, or platforms.
- Perform activities related to underwater search and rescue, salvage, recovery, or cleanup operations.
- Perform offshore oil or gas exploration or extraction duties, such as conducting underwater surveys or repairing and maintaining drilling rigs or platforms.
- Drill holes in rock and rig explosives for underwater demolitions.
- Set up dive sites for recreational instruction.
- Cultivate or harvest marine species or perform routine work on fish farms.
- Check and maintain diving equipment, such as helmets, masks, air tanks, harnesses, or gauges.
- Install, inspect, clean, or repair piping or valves.
- Remove rubbish or pollution from the sea.
- Lubricate door closer oil chambers, and pack spindles with leather washers.
- Clean door closer parts, using caustic soda, rotary brushes, or grinding wheels.
- Wind large springs with upward motion of arm.
- Adjust doors to open or close with the correct amount of effort, or make simple adjustments to electric openers.
- Carry springs to tops of doors, using ladders or scaffolding, and attach springs to tracks to install spring systems.
- Repair or replace worn or broken door parts, using hand tools.
- Complete required paperwork, such as work orders, according to services performed or required.
- Fasten angle iron back-hangers to ceilings and tracks, using fasteners or welding equipment.
- Collect payment upon job completion.
- Install door frames, rails, steel rolling curtains, electronic-eye mechanisms, or electric door openers and closers, using power tools, hand tools, and electronic test equipment.
- Inspect job sites, assessing headroom, side room, or other conditions to determine appropriateness of door for a given location.
- Assemble and fasten tracks to structures or bucks, using impact wrenches or welding equipment.
- Set doors into place or stack hardware sections into openings after rail or track installation.
- Operate lifts, winches, or chain falls to move heavy curtain doors.
- Remove or disassemble defective automatic mechanical door closers, using hand tools.
- Fabricate replacements for worn or broken parts, using welders, lathes, drill presses, or shaping or milling machines.
- Prepare doors for hardware installation, such as drilling holes to install locks.
- Run low voltage wiring on ceiling surfaces, using insulated staples.
- Cut door stops or angle irons to fit openings.
- Study blueprints and schematic diagrams to determine appropriate methods of installing or repairing automated door openers.
- Install dock seals, bumpers, or shelters.
- Order replacement springs, sections, or slats.
- Set in and secure floor treadles for door-activating mechanisms, and connect power packs and electrical panelboards to treadles.
- Cover treadles with carpeting or other floor covering materials, and test systems by operating treadles.
- Bore or cut holes in flooring as required for installation, using hand or power tools.
- Lubricate door closer oil chambers, and pack spindles with leather washers.
- Clean door closer parts, using caustic soda, rotary brushes, or grinding wheels.
- Clean or lubricate shafts, bearings, gears, or other parts of machinery.
- Maintain or repair specialized equipment or machinery located in cafeterias, laundries, hospitals, stores, offices, or factories.
- Perform general cleaning of buildings or properties.
- Perform routine maintenance on boilers, such as replacing burners or hoses, installing replacement parts, or reinforcing structural weaknesses to ensure optimal boiler efficiency.
- Provide groundskeeping services, such as landscaping or snow removal.
- Perform routine maintenance, such as inspecting drives, motors, or belts, checking fluid levels, replacing filters, or doing other preventive maintenance actions.
- Inspect, operate, or test machinery or equipment to diagnose machine malfunctions.
- Adjust functional parts of devices or control instruments, using hand tools, levels, plumb bobs, or straightedges.
- Order parts, supplies, or equipment from catalogs or suppliers.
- Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.
- Design new equipment to aid in the repair or maintenance of machines, mechanical equipment, or building structures.
- Assemble, install, or repair wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.
- Estimate costs to repair machinery, equipment, or building structures.
- Align and balance new equipment after installation.
- Record type and cost of maintenance or repair work.
- Dismantle machines, equipment, or devices to access and remove defective parts, using hoists, cranes, hand tools, or power tools.
- Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, or schematic diagrams.
- Install equipment to improve the energy or operational efficiency of residential or commercial buildings.
- Set up and operate machine tools to repair or fabricate machine parts, jigs, fixtures, or tools.
- Train or manage maintenance personnel or subcontractors.
- Fabricate or repair counters, benches, partitions, or other wooden structures, such as sheds or outbuildings.
- Paint or repair roofs, windows, doors, floors, woodwork, plaster, drywall, or other parts of building structures.
- Test and treat water supply.
- Operate cutting torches or welding equipment to cut or join metal parts.
- Inspect used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, or other measuring instruments.
- Assemble boilers at installation sites, using tools such as levels, plumb bobs, hammers, torches, or other hand tools.
- Lay brick to repair or maintain buildings, walls, arches, or other structures.
- Position, attach, or blow insulating materials to prevent energy losses from buildings, pipes, or other structures or objects.
- Grind and reseat valves, using valve-grinding machines.
- Repair machines, equipment, or structures, using tools such as hammers, hoists, saws, drills, wrenches, or equipment such as precision measuring instruments or electrical or electronic testing devices.
- Clean or lubricate shafts, bearings, gears, or other parts of machinery.
- Maintain or repair specialized equipment or machinery located in cafeterias, laundries, hospitals, stores, offices, or factories.
- Perform general cleaning of buildings or properties.
- Perform routine maintenance on boilers, such as replacing burners or hoses, installing replacement parts, or reinforcing structural weaknesses to ensure optimal boiler efficiency.
- Provide groundskeeping services, such as landscaping or snow removal.
- Perform routine maintenance such as cleaning and oiling parts, honing cylinders, and tuning ignition systems.
- Repair and maintain gasoline engines used to power equipment such as portable saws, lawn mowers, generators, and compressors.
- Record repairs made, time spent, and parts used.
- Test and inspect engines to determine malfunctions, to locate missing and broken parts, and to verify repairs, using diagnostic instruments.
- Dismantle engines, using hand tools, and examine parts for defects.
- Adjust points, valves, carburetors, distributors, and spark plug gaps, using feeler gauges.
- Repair or replace defective parts such as magnetos, water pumps, gears, pistons, and carburetors, using hand tools.
- Reassemble engines after repair or maintenance work is complete.
- Replace motors.
- Obtain problem descriptions from customers, and prepare cost estimates for repairs.
- Show customers how to maintain equipment.
- Remove engines from equipment, and position and bolt engines to repair stands.
- Sell parts and equipment.
- Grind, ream, rebore, and re-tap parts to obtain specified clearances, using grinders, lathes, taps, reamers, boring machines, and micrometers.
- Perform routine maintenance such as cleaning and oiling parts, honing cylinders, and tuning ignition systems.
- Repair and maintain gasoline engines used to power equipment such as portable saws, lawn mowers, generators, and compressors.
- Clean, lubricate, or adjust parts, equipment, or machinery.
- Repair or maintain the operating condition of industrial production or processing machinery or equipment.
- Repair or replace broken or malfunctioning components of machinery or equipment.
- Disassemble machinery or equipment to remove parts and make repairs.
- Reassemble equipment after completion of inspections, testing, or repairs.
- Examine parts for defects, such as breakage or excessive wear.
- Record repairs and maintenance performed.
- Operate newly repaired machinery or equipment to verify the adequacy of repairs.
- Record parts or materials used and order or requisition new parts or materials, as necessary.
- Observe and test the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.
- Analyze test results, machine error messages, or information obtained from operators to diagnose equipment problems.
- Study blueprints or manufacturers' manuals to determine correct installation or operation of machinery.
- Cut and weld metal to repair broken metal parts, fabricate new parts, or assemble new equipment.
- Enter codes and instructions to program computer-controlled machinery.
- Demonstrate equipment functions and features to machine operators.
- Assign schedules to work crews.
- Clean, lubricate, or adjust parts, equipment, or machinery.
- Repair or maintain the operating condition of industrial production or processing machinery or equipment.
- Clean and oil machine parts.
- Fill machines with products, ingredients, money, and other supplies.
- Inspect machines and meters to determine causes of malfunctions and fix minor problems such as jammed bills or stuck products.
- Test machines to determine proper functioning.
- Replace malfunctioning parts, such as worn magnetic heads on automatic teller machine (ATM) card readers.
- Maintain records of machine maintenance and repair.
- Order parts needed for machine repairs.
- Adjust and repair coin, vending, or amusement machines and meters and replace defective mechanical and electrical parts, using hand tools, soldering irons, and diagrams.
- Record transaction information on forms or logs, and notify designated personnel of discrepancies.
- Keep records of merchandise distributed and money collected.
- Collect coins and bills from machines, prepare invoices, and settle accounts with concessionaires.
- Make service calls to maintain and repair machines.
- Adjust machine pressure gauges and thermostats.
- Prepare repair cost estimates.
- Disassemble and assemble machines, according to specifications and using hand and power tools.
- Contact other repair personnel or make arrangements for the removal of machines in cases where major repairs are required.
- Transport machines to installation sites.
- Refer to manuals and wiring diagrams to gather information needed to repair machines.
- Install machines, making the necessary water and electrical connections in compliance with codes.
- Clean and oil machine parts.
- Fill machines with products, ingredients, money, and other supplies.
- Clean, oil, or adjust mechanical parts to maintain machines' operating efficiency and to prevent breakdowns.
- Fill machines with toners, inks, or other duplicating fluids.
- Reassemble machines after making repairs or replacing parts.
- Converse with customers to determine details of equipment problems.
- Disassemble machines to examine parts, such as wires, gears, or bearings for wear or defects, using hand or power tools and measuring devices.
- Advise customers concerning equipment operation, maintenance, or programming.
- Align, adjust, or calibrate equipment according to specifications.
- Repair, adjust, or replace electrical or mechanical components or parts, using hand tools, power tools, or soldering or welding equipment.
- Travel to customers' stores or offices to service machines or to provide emergency repair service.
- Maintain parts inventories and order any additional parts needed for repairs.
- Operate machines to test functioning of parts or mechanisms.
- Reinstall software programs or adjust settings on existing software to fix machine malfunctions.
- Maintain records of equipment maintenance work or repairs.
- Test new systems to ensure that they are in working order.
- Complete repair bills, shop records, time cards, or expense reports.
- Install and configure new equipment, including operating software or peripheral equipment.
- Analyze equipment performance records to assess equipment functioning.
- Read specifications, such as blueprints, charts, or schematics, to determine machine settings or adjustments.
- Update existing equipment, performing tasks such as installing updated circuit boards or additional memory.
- Test components or circuits of faulty equipment to locate defects, using oscilloscopes, signal generators, ammeters, voltmeters, or special diagnostic software programs.
- Assemble machines according to specifications, using hand or power tools and measuring devices.
- Lay cable and hook up electrical connections between machines, power sources, and phone lines.
- Enter information into computers to copy programs from one electronic component to another or to draw, modify, or store schematics.
- Train new repairers.
- Calibrate testing instruments.
- Clean, oil, or adjust mechanical parts to maintain machines' operating efficiency and to prevent breakdowns.
- Fill machines with toners, inks, or other duplicating fluids.
- Clean sides of whitewall tires.
- Clean and tidy up the shop.
- Raise vehicles, using hydraulic jacks.
- Remount wheels onto vehicles.
- Unbolt and remove wheels from vehicles, using lug wrenches or other hand or power tools.
- Place wheels on balancing machines to determine counterweights required to balance wheels.
- Identify tire size and ply and inflate tires accordingly.
- Replace valve stems and remove puncturing objects.
- Hammer required counterweights onto rims of wheels.
- Reassemble tires onto wheels.
- Seal punctures in tubeless tires by inserting adhesive material and expanding rubber plugs into punctures, using hand tools.
- Inspect tire casings for defects, such as holes or tears.
- Locate punctures in tubeless tires by visual inspection or by immersing inflated tires in water baths and observing air bubbles.
- Glue tire patches over ruptures in tire casings, using rubber cement.
- Assist mechanics and perform various mechanical duties, such as changing oil or checking and replacing batteries.
- Rotate tires to different positions on vehicles, using hand tools.
- Buff defective areas of inner tubes, using scrapers.
- Order replacements for tires or tubes.
- Separate tubed tires from wheels, using rubber mallets and metal bars or mechanical tire changers.
- Inflate inner tubes and immerse them in water to locate leaks.
- Roll new rubber treads, known as camelbacks, over tire casings and mold the semi-raw rubber treads onto the buffed casings.
- Prepare rims and wheel drums for reassembly by scraping, grinding, or sandblasting.
- Apply rubber cement to buffed tire casings prior to vulcanization process.
- Patch tubes with adhesive rubber patches or seal rubber patches to tubes, using hot vulcanizing plates.
- Place tire casings and tread rubber assemblies in tire molds for the vulcanization process and exert pressure to ensure good adhesion.
- Drive automobile or service trucks to industrial sites to provide services or respond to emergency calls.
- Clean sides of whitewall tires.
- Clean and tidy up the shop.
- Replace and clean electrical or electronic components.
- Install equipment and accessories, such as stereos, navigation equipment, communication equipment, and security systems.
- Inspect and test electrical or electronic systems to locate and diagnose malfunctions, using visual inspections and testing instruments, such as oscilloscopes and voltmeters.
- Cut openings and drill holes for fixtures and equipment, using electric drills and routers.
- Splice wires with knives or cutting pliers, and solder connections to fixtures and equipment.
- Diagnose or repair problems with electronic equipment, such as sound, navigation, communication, and security equipment, in motor vehicles.
- Run new speaker and electrical cables.
- Confer with customers to determine the nature of malfunctions.
- Remove seats, carpeting, and interiors of doors and add sound-absorbing material in empty spaces, reinstalling interior parts.
- Record results of diagnostic tests.
- Estimate costs of repairs, based on parts and labor charges.
- Build fiberglass or wooden enclosures for sound components, and fit them to automobile dimensions.
- Replace and clean electrical or electronic components.
- Clean and dress machine surfaces and component parts.
- Test rigging to ensure safety and reliability.
- Signal or verbally direct workers engaged in hoisting and moving loads to ensure safety of workers and materials.
- Control movement of heavy equipment through narrow openings or confined spaces, using chainfalls, gin poles, gallows frames, and other equipment.
- Tilt, dip, and turn suspended loads to maneuver over, under, or around obstacles, using multi-point suspension techniques.
- Select gear, such as cables, pulleys, and winches, according to load weights and sizes, facilities, and work schedules.
- Dismantle and store rigging equipment after use.
- Attach loads to rigging to provide support or prepare them for moving, using hand and power tools.
- Manipulate rigging lines, hoists, and pulling gear to move or support materials, such as heavy equipment, ships, or theatrical sets.
- Align, level, and anchor machinery.
- Load machines onto trucks to prepare for transportation.
- Attach pulleys and blocks to fixed overhead structures, such as beams, ceilings, and gin pole booms, using bolts and clamps.
- Fabricate, set up, and repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools.
- Install ground rigging for yarding lines, attaching chokers to logs and to the lines.
- Clean and dress machine surfaces and component parts.
- Clean and lubricate cameras and polish camera lenses, using cleaning materials and work aids.
- Adjust cameras, photographic mechanisms, or equipment such as range and view finders, shutters, light meters, or lens systems, using hand tools.
- Disassemble equipment to gain access to defect, using hand tools.
- Test equipment performance, focus of lens system, diaphragm alignment, lens mounts, or film transport, using precision gauges.
- Requisition parts or materials.
- Calibrate and verify accuracy of light meters, shutter diaphragm operation, or lens carriers, using timing instruments.
- Examine cameras, equipment, processed film, or laboratory reports to diagnose malfunction, using work aids and specifications.
- Read and interpret engineering drawings, diagrams, instructions, or specifications to determine needed repairs, fabrication method, and operation sequence.
- Measure parts to verify specified dimensions or settings, such as camera shutter speed or light meter reading accuracy, using measuring instruments.
- Fabricate or modify defective electronic, electrical, or mechanical components, using bench lathe, milling machine, shaper, grinder, or precision hand tools, according to specifications.
- Install electrical assemblies and wiring in aircraft camera housings and memory cards or film in cameras, following blueprints and using hand tools and soldering equipment.
- Assemble aircraft cameras, still or motion picture cameras, photographic equipment, or frames, using diagrams, blueprints, bench machines, hand tools, or power tools.
- Record test data and document fabrication techniques on reports.
- Lay out reference points and dimensions on parts or metal stock to be machined, using precision measuring instruments.
- Recommend design changes or upgrades of microfilming, film-developing, or photographic equipment.
- Clean and lubricate cameras and polish camera lenses, using cleaning materials and work aids.
- Repair, replace, and clean equipment and components such as circuit breakers, brushes, and commutators.
- Inspect and test equipment and circuits to identify malfunctions or defects, using wiring diagrams and testing devices such as ohmmeters, voltmeters, or ammeters.
- Prepare and maintain records detailing tests, repairs, and maintenance.
- Consult manuals, schematics, wiring diagrams, and engineering personnel to troubleshoot and solve equipment problems and to determine optimum equipment functioning.
- Analyze test data to diagnose malfunctions, to determine performance characteristics of systems, or to evaluate effects of system modifications.
- Open and close switches to isolate defective relays, performing adjustments or repairs.
- Notify facility personnel of equipment shutdowns.
- Run signal quality and connectivity tests for individual cables, and record results.
- Maintain inventories of spare parts for all equipment, requisitioning parts as necessary.
- Construct, test, maintain, and repair substation relay and control systems.
- Test insulators and bushings of equipment by inducing voltage across insulation, testing current, and calculating insulation loss.
- Schedule and supervise the construction and testing of special devices and the implementation of unique monitoring or control systems.
- Schedule and supervise splicing or termination of cables in color-code order.
- Test oil in circuit breakers and transformers for dielectric strength, refilling oil periodically.
- Disconnect voltage regulators, bolts, and screws, and connect replacement regulators to high-voltage lines.
- Set forms and pour concrete footings for installation of heavy equipment.
- Repair, replace, and clean equipment and components such as circuit breakers, brushes, and commutators.
- Prepare, install, maintain, or repair equipment used for hydrologic study, such as water level recorders, stream flow gauges, and water analyzers.
- Analyze ecological data about the impact of pollution, erosion, floods, and other environmental problems on bodies of water.
- Answer technical questions from hydrologists, policymakers, or other customers developing water conservation plans.
- Apply research findings to minimize the environmental impacts of pollution, waterborne diseases, erosion, or sedimentation.
- Assist in designing programs to ensure the proper sealing of abandoned wells.
- Collect water and soil samples to test for physical, chemical, or biological properties, such as pH, oxygen level, temperature, and pollution.
- Develop computer models for hydrologic predictions.
- Estimate the costs and benefits of municipal projects, such as hydroelectric power plants, irrigation systems, and wastewater treatment facilities.
- Investigate complaints or conflicts related to the alteration of public waters by gathering information, recommending alternatives, or preparing legal documents.
- Investigate the properties, origins, or activities of glaciers, ice, snow, or permafrost.
- Locate and deliver information or data as requested by customers, such as contractors, government entities, and members of the public.
- Measure the properties of bodies of water, such as water levels, volume, and flow.
- Perform quality control checks on data to be used by hydrologists.
- Provide real time data to emergency management and weather service personnel during flood events.
- Write groundwater contamination reports on known, suspected, or potential hazardous waste sites.
- Write materials for research publications, such as maps, tables, and reports, to disseminate findings.
- Prepare, install, maintain, or repair equipment used for hydrologic study, such as water level recorders, stream flow gauges, and water analyzers.
- Chip slag from linings of ladles or remove linings when beyond repair, using hammers and chisels.
- Reline or repair ladles and pouring spouts with refractory clay, using trowels.
- Mix specified amounts of sand, clay, mortar powder, and water to form refractory clay or mortar, using shovels or mixing machines.
- Measure furnace walls to determine dimensions and cut required number of sheets from plastic block, using saws.
- Tighten locknuts holding refractory stopper assemblies together, spread mortar on jackets to seal sleeve joints, and dry mortar in ovens.
- Dry and bake new linings by placing inverted linings over burners, building fires in ladles, or by using blowtorches.
- Remove worn or damaged plastic block refractory linings of furnaces, using hand tools.
- Fasten stopper heads to rods with metal pins to assemble refractory stoppers used to plug pouring nozzles of steel ladles.
- Climb scaffolding, carrying hoses, and spray surfaces of cupolas with refractory mixtures, using spray equipment.
- Drill holes in furnace walls, bolt overlapping layers of plastic to walls, and hammer surfaces to compress layers into solid sheets.
- Spread mortar on stopper heads and rods, using trowels, and slide brick sleeves over rods to form refractory jackets.
- Dump and tamp clay in molds, using tamping tools.
- Disassemble molds, and cut, chip, and smooth clay structures such as floaters, drawbars, and L-blocks.
- Transfer clay structures to curing ovens, melting tanks, and drawing kilns, using forklifts.
- Install preformed metal scaffolding in interiors of cupolas, using hand tools.
- Install clay structures in melting tanks and drawing kilns to control the flow and temperature of molten glass, using hoists and hand tools.
- Chip slag from linings of ladles or remove linings when beyond repair, using hammers and chisels.
- Perform preventive maintenance or service, such as cleaning, lubricating, or adjusting equipment.
- Test or calibrate components or equipment, following manufacturers' manuals and troubleshooting techniques, using hand tools, power tools, or measuring devices.
- Inspect, test, or troubleshoot malfunctioning medical or related equipment, following manufacturers' specifications and using test and analysis instruments.
- Keep records of maintenance, repair, and required updates of equipment.
- Disassemble malfunctioning equipment and remove, repair, or replace defective parts, such as motors, clutches, or transformers.
- Examine medical equipment or facility's structural environment and check for proper use of equipment to protect patients and staff from electrical or mechanical hazards and to ensure compliance with safety regulations.
- Install medical equipment.
- Test, evaluate, and classify excess or in-use medical equipment and determine serviceability, condition, and disposition, in accordance with regulations.
- Plan and carry out work assignments, using blueprints, schematic drawings, technical manuals, wiring diagrams, or liquid or air flow sheets, following prescribed regulations, directives, or other instructions as required.
- Study technical manuals or attend training sessions provided by equipment manufacturers to maintain current knowledge.
- Explain or demonstrate correct operation or preventive maintenance of medical equipment to personnel.
- Research catalogs or repair part lists to locate sources for repair parts, requisitioning parts and recording their receipt.
- Repair shop equipment, metal furniture, or hospital equipment, including welding broken parts or replacing missing parts, or bring item into local shop for major repairs.
- Solder loose connections, using soldering iron.
- Compute power and space requirements for installing medical, dental, or related equipment and install units to manufacturers' specifications.
- Evaluate technical specifications to identify equipment or systems best suited for intended use and possible purchase, based on specifications, user needs, or technical requirements.
- Contribute expertise to develop medical maintenance standard operating procedures.
- Fabricate, dress down, or substitute parts or major new items to modify equipment to meet unique operational or research needs, working from job orders, sketches, modification orders, samples, or discussions with operating officials.
- Supervise or advise subordinate personnel.
- Make computations relating to load requirements of wiring or equipment, using algebraic expressions and standard formulas.
- Perform preventive maintenance or service, such as cleaning, lubricating, or adjusting equipment.
- Perform scheduled maintenance, and clean units and components.
- Record conditions of cars, and repair and maintenance work performed or to be performed.
- Inspect components such as bearings, seals, gaskets, wheels, and coupler assemblies to determine if repairs are needed.
- Repair or replace defective or worn parts such as bearings, pistons, and gears, using hand tools, torque wrenches, power tools, and welding equipment.
- Inspect the interior and exterior of rail cars coming into rail yards to identify defects and to determine the extent of wear and damage.
- Remove locomotives, car mechanical units, or other components, using pneumatic hoists and jacks, pinch bars, hand tools, and cutting torches.
- Test units for operability before and after repairs.
- Adjust repaired or replaced units as needed to ensure proper operation.
- Repair, fabricate, and install steel or wood fittings, using blueprints, shop sketches, and instruction manuals.
- Examine car roofs for wear and damage, and repair defective sections, using roofing material, cement, nails, and waterproof paint.
- Paint car exteriors, interiors, and fixtures.
- Repair and maintain electrical and electronic controls for propulsion and braking systems.
- Disassemble units such as water pumps, control valves, and compressors so that repairs can be made.
- Measure diameters of axle wheel seats, using micrometers, and mark dimensions on axles so that wheels can be bored to specified dimensions.
- Test electrical systems of cars by operating systems and using testing equipment such as ammeters.
- Replace defective wiring and insulation, and tighten electrical connections, using hand tools.
- Install and repair interior flooring, fixtures, walls, plumbing, steps, and platforms.
- Repair window sash frames, attach weather stripping and channels to frames, and replace window glass, using hand tools.
- Align car sides for installation of car ends and crossties, using width gauges, turnbuckles, and wrenches.
- Repair car upholstery.
- Perform scheduled maintenance, and clean units and components.
- Clean or maintain tools or test equipment.
- Set up service for customers, installing, connecting, testing, or adjusting equipment.
- Travel to customers' premises to install, maintain, or repair audio and visual electronic reception equipment or accessories.
- Measure signal strength at utility poles, using electronic test equipment.
- Inspect or test lines or cables, recording and analyzing test results, to assess transmission characteristics and locate faults or malfunctions.
- Splice cables, using hand tools, epoxy, or mechanical equipment.
- Access specific areas to string lines, or install terminal boxes, auxiliary equipment, or appliances, using bucket trucks, climbing poles or ladders, or entering tunnels, trenches, or crawl spaces.
- String cables between structures and lines from poles, towers, or trenches, and pull lines to proper tension.
- Pull up cable by hand from large reels mounted on trucks.
- Lay underground cable directly in trenches, or string it through conduits running through trenches.
- Pull cable through ducts by hand or with winches.
- Dig trenches for underground wires or cables.
- Explain cable service to subscribers after installation, and collect any installation fees due.
- Place insulation over conductors, or seal splices with moisture-proof covering.
- Compute impedance of wires from poles to houses to determine additional resistance needed for reducing signals to desired levels.
- Install equipment such as amplifiers or repeaters to maintain the strength of communications transmissions.
- Use a variety of construction equipment to complete installations, such as digger derricks, trenchers, or cable plows.
- Fill and tamp holes, using cement, earth, and tamping devices.
- Participate in the construction or removal of telecommunication towers or associated support structures.
- Dig holes for power poles, using power augers or shovels, set poles in place with cranes, and hoist poles upright, using winches.
- Clean or maintain tools or test equipment.
- Conduct preventative maintenance and repair, and lubricate machines and equipment.
- Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
- Level bedplate and establish centerline, using straightedge, levels, and transit.
- Align machines or equipment, using hoists, jacks, hand tools, squares, rules, micrometers, lasers, or plumb bobs.
- Assemble and install equipment, using hand tools and power tools.
- Signal crane operator to lower basic assembly units to bedplate, and align unit to centerline.
- Replace defective parts of machine, or adjust clearances and alignment of moving parts.
- Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
- Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
- Lay out mounting holes, using measuring instruments, and drill holes with power drill.
- Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings to determine work procedures.
- Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
- Move machinery and equipment, using hoists, dollies, rollers, and trucks.
- Dismantle machinery and equipment for shipment to installation site, performing installation and maintenance work as part of team.
- Weld, repair, and fabricate equipment or machinery.
- Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
- Fabricate and dismantle parts, equipment, and machines, using a cutting torch or other cutting equipment.
- Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
- Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
- Install robot and modify its program, using teach pendant.
- Troubleshoot equipment, electrical components, hydraulics, or other mechanical systems.
- Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
- Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
- Conduct preventative maintenance and repair, and lubricate machines and equipment.
- Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery.
- Use handtools, such as screwdrivers, pliers, wrenches, pressure gauges, or precision instruments, as well as power tools, such as pneumatic wrenches, lathes, welding equipment, or jacks and hoists.
- Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition.
- Raise trucks, buses, and heavy parts or equipment using hydraulic jacks or hoists.
- Adjust and reline brakes, align wheels, tighten bolts and screws, and reassemble equipment.
- Attach test instruments to equipment, and read dials and gauges to diagnose malfunctions.
- Examine and adjust protective guards, loose bolts, and specified safety devices.
- Inspect, test, and listen to defective equipment to diagnose malfunctions, using test instruments such as handheld computers, motor analyzers, chassis charts, or pressure gauges.
- Rewire ignition systems, lights, and instrument panels.
- Test drive trucks and buses to diagnose malfunctions or to ensure that they are working properly.
- Diagnose and repair vehicle heating and cooling systems.
- Inspect, repair, and maintain automotive and mechanical equipment and machinery, such as pumps and compressors.
- Inspect and verify dimensions and clearances of parts to ensure conformance to factory specifications.
- Disassemble and overhaul internal combustion engines, pumps, generators, transmissions, clutches, and differential units.
- Adjust or repair computer controlled exhaust emissions devices.
- Rebuild gas or diesel engines.
- Specialize in repairing and maintaining parts of the engine, such as fuel injection systems.
- Recondition and replace parts, pistons, bearings, gears, and valves.
- Install or repair accessories.
- Repair or adjust seats, doors, or windows.
- Dismount, mount, and repair or replace tires.
- Align front ends and suspension systems.
- Maintain or repair vehicles with alternative fuel systems, including biodiesel, hybrid, or compressed natural gas vehicles.
- Measure vehicle emissions to determine whether they are within acceptable limits.
- Follow green operational practices involving conservation of water or energy or reduction of solid waste.
- Operate valve-grinding machines to grind and reset valves.
- Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery.
- Maintain or repair lab equipment.
- Evaluate and grade students' class work, laboratory work, assignments, and papers.
- Prepare and deliver lectures to undergraduate or graduate students on topics such as molecular biology, marine biology, and botany.
- Plan, evaluate, and revise curricula, course content, and course materials and methods of instruction.
- Prepare materials for laboratory activities and course materials, such as syllabi, homework assignments, and handouts.
- Initiate, facilitate, and moderate classroom discussions.
- Supervise students' laboratory work.
- Keep abreast of developments in the field by reading current literature, talking with colleagues, and participating in professional conferences.
- Maintain student attendance records, grades, and other required records.
- Compile, administer, and grade examinations, or assign this work to others.
- Supervise undergraduate or graduate teaching, internship, and research work.
- Assist students who need extra help with their coursework outside of class.
- Advise students on academic and vocational curricula and on career issues.
- Maintain regularly scheduled office hours to advise and assist students.
- Conduct research in a particular field of knowledge and publish findings in professional journals, books, or electronic media.
- Collaborate with colleagues to address teaching and research issues.
- Select and obtain materials and supplies, such as textbooks and laboratory equipment.
- Serve on academic or administrative committees that deal with institutional policies, departmental matters, and academic issues.
- Provide students course-related experiences, such as field trips, outside the classroom.
- Write grant proposals to procure external research funding.
- Review papers for publication in journals.
- Participate in student recruitment, registration, and placement activities.
- Perform administrative duties, such as serving as department head.
- Compile bibliographies of specialized materials for outside reading assignments.
- Participate in campus and community events, such as giving presentations to the public.
- Act as advisers to student organizations.
- Provide professional consulting services to government or industry.
- Maintain or repair lab equipment.