- Apply lubricants or coolants to workpieces.
Occupations with related activities Save Table: XLSX CSV
Shared Activities | Similar Activities | Job Zone | Code | Occupation |
1 | 2 | 2 | 51-4031.00 | Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic |
1 | 2 | 2 | 51-4122.00 | Welding, Soldering, and Brazing Machine Setters, Operators, and Tenders |
1 | 2 | 2 | 51-4072.00 | Molding, Coremaking, and Casting Machine Setters, Operators, and Tenders, Metal and Plastic |
1 | 0 | 2 | 51-2061.00 | Timing Device Assemblers and Adjusters |
1 | 0 | 2 | 51-2031.00 | Engine and Other Machine Assemblers |
1 | 0 | 2 | 51-4033.00 | Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic |
1 | 0 | 2 | 51-2011.00 | Aircraft Structure, Surfaces, Rigging, and Systems Assemblers |
1 | 0 | 2 | 51-9195.00 | Molders, Shapers, and Casters, Except Metal and Plastic |
- Apply lubricants or coolants to workpieces.
- Lubricate production equipment.
- Sharpen cutting or grinding tools.
- Set equipment guides, stops, spacers, or other fixtures.
- Inspect metal, plastic, or composite products.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Sort materials or products for processing, storing, shipping, or grading.
- Operate cutting equipment.
- Monitor equipment operation to ensure that products are not flawed.
- Record operational or production data.
- Mount attachments or tools onto production equipment.
- Inspect production equipment.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Mount materials or workpieces onto production equipment.
- Align parts or workpieces to ensure proper assembly.
- Load materials into production equipment.
- Operate metal or plastic forming equipment.
- Clean production equipment.
- Mark products, workpieces, or equipment with identifying information.
- Set equipment controls to meet cutting specifications.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Clean work areas.
- Plan production or operational procedures or sequences.
- Operate forklifts or other loaders.
- Adjust equipment controls to regulate coolant flow.
- Feed materials or products into or through equipment.
- Operate grinding equipment.
- Disassemble equipment for maintenance or repair.
- Remove accessories, tools, or other parts from equipment.
- Replace worn equipment components.
- Smooth metal surfaces or edges.
- Cut industrial materials in preparation for fabrication or processing.
- Select production equipment according to product specifications.
- Heat material or workpieces to prepare for or complete production.
- Apply lubricants or coolants to workpieces.
- Lubricate production equipment.
- Sharpen cutting or grinding tools.
- Apply lubricants or coolants to workpieces.
- Lubricate production equipment.
- Maintain production or processing equipment.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Load materials into production equipment.
- Feed materials or products into or through equipment.
- Monitor equipment operation to ensure proper functioning.
- Assemble metal or plastic parts or products.
- Align parts or workpieces to ensure proper assembly.
- Operate welding equipment.
- Record operational or production data.
- Lay out parts to prepare for assembly.
- Calculate specific material, equipment, or labor requirements for production.
- Enter commands, instructions, or specifications into equipment.
- Adjust equipment controls to regulate gas flow.
- Adjust flow of electricity to tools or production equipment.
- Direct operational or production activities.
- Select production equipment according to product specifications.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Mount attachments or tools onto production equipment.
- Clean production equipment.
- Move products, materials, or equipment between work areas.
- Operate cutting equipment.
- Operate grinding equipment.
- Reshape metal workpieces to established specifications.
- Conduct test runs of production equipment.
- Remove products or workpieces from production equipment.
- Solder parts or workpieces.
- Assemble machine tools, parts, or fixtures.
- Design tools, fixtures, or other devices for production equipment.
- Apply solutions to production equipment.
- Immerse objects or workpieces in cleaning or coating solutions.
- Heat material or workpieces to prepare for or complete production.
- Apply lubricants or coolants to workpieces.
- Lubricate production equipment.
- Maintain production or processing equipment.
- Apply lubricants or coolants to workpieces.
- Lubricate production equipment.
- Maintain production or processing equipment.
- Inspect metal, plastic, or composite products.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Monitor equipment operation to ensure that products are not flawed.
- Operate metal or plastic forming equipment.
- Adjust temperature controls of ovens or other heating equipment.
- Review blueprints or other instructions to determine operational methods or sequences.
- Study blueprints or other instructions to determine equipment setup requirements.
- Monitor instruments to ensure proper production conditions.
- Connect supply lines to production equipment or tools.
- Remove accessories, tools, or other parts from equipment.
- Operate cranes, hoists, or other moving or lifting equipment.
- Mount attachments or tools onto production equipment.
- Apply protective or decorative finishes to workpieces or products.
- Clean production equipment.
- Package products for storage or shipment.
- Remove products or workpieces from production equipment.
- Mark products, workpieces, or equipment with identifying information.
- Move products, materials, or equipment between work areas.
- Remove workpieces from molds.
- Maintain inventories of materials, equipment, or products.
- Record operational or production data.
- Repair templates, patterns, or molds.
- Replace worn equipment components.
- Select production equipment according to product specifications.
- Select production input materials.
- Set equipment guides, stops, spacers, or other fixtures.
- Load materials into production equipment.
- Fill cracks, imperfections, or holes in products or workpieces.
- Smooth metal surfaces or edges.
- Mix substances to create chemical solutions.
- Mount materials or workpieces onto production equipment.
- Operate grinding equipment.
- Trim excess material from workpieces.
- Apply parting agents or other solutions to molds.
- Heat material or workpieces to prepare for or complete production.
- Place materials into molds.
- Load items into ovens or furnaces.
- Build production molds.
- Skim impurities from molten metal.
- Apply lubricants or coolants to workpieces.
- Lubricate production equipment.
- Maintain production or processing equipment.
- Apply lubricants or coolants to workpieces.
- Repair precision devices or workpieces.
- Align parts or workpieces to ensure proper assembly.
- Assemble metal or plastic parts or products.
- Inspect timing devices.
- Clean workpieces or finished products.
- Disassemble equipment for maintenance or repair.
- Calculate dimensions of workpieces, products, or equipment.
- Reshape small metal components for precision assembly.
- Review blueprints or other instructions to determine operational methods or sequences.
- Apply lubricants or coolants to workpieces.
- Apply lubricants or coolants to workpieces.
- Plan production or operational procedures or sequences.
- Review blueprints or other instructions to determine operational methods or sequences.
- Inspect installed components or assemblies.
- Align parts or workpieces to ensure proper assembly.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Set equipment guides, stops, spacers, or other fixtures.
- Assemble electromechanical or hydraulic systems.
- Smooth metal surfaces or edges.
- Cut industrial materials in preparation for fabrication or processing.
- Drill holes in parts, equipment, or materials.
- Lay out parts to prepare for assembly.
- Repair parts or assemblies.
- Replace worn equipment components.
- Operate grinding equipment.
- Operate metal or plastic forming equipment.
- Apply lubricants or coolants to workpieces.
- Apply lubricants or coolants to workpieces.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Lay out parts to prepare for assembly.
- Watch operating equipment to detect malfunctions.
- Operate grinding equipment.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Review blueprints or other instructions to determine operational methods or sequences.
- Select production equipment according to product specifications.
- Calculate dimensions of workpieces, products, or equipment.
- Mount attachments or tools onto production equipment.
- Operate cutting equipment.
- Reshape metal workpieces to established specifications.
- Adjust equipment controls to regulate coolant flow.
- Lift materials or workpieces using cranes or other lifting equipment.
- Mount materials or workpieces onto production equipment.
- Notify others of equipment repair or maintenance needs.
- Repair production equipment or tools.
- Replace worn equipment components.
- Maintain inventories of materials, equipment, or products.
- Feed materials or products into or through equipment.
- Set equipment guides, stops, spacers, or other fixtures.
- Apply lubricants or coolants to workpieces.
- Apply lubricants or coolants to workpieces.
- Assemble metal or plastic parts or products.
- Assemble metal structures.
- Review blueprints or other instructions to determine operational methods or sequences.
- Adjust vehicle components according to specifications.
- Cut industrial materials in preparation for fabrication or processing.
- Align parts or workpieces to ensure proper assembly.
- Inspect installed components or assemblies.
- Repair parts or assemblies.
- Replace worn equipment components.
- Reshape metal workpieces to established specifications.
- Trim excess material from workpieces.
- Operate metal or plastic forming equipment.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Clean workpieces or finished products.
- Assemble electrical or electronic equipment.
- Install mechanical components in production equipment.
- Signal others to coordinate work activities.
- Operate cutting equipment.
- Connect supply lines to production equipment or tools.
- Assemble electromechanical or hydraulic systems.
- Mount attachments or tools onto production equipment.
- Mark products, workpieces, or equipment with identifying information.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Operate welding equipment.
- Solder parts or workpieces.
- Sort recyclable materials.
- Monitor equipment operation to ensure proper functioning.
- Apply lubricants or coolants to workpieces.
- Apply lubricants or coolants to workpieces.
- Read work orders or other instructions to determine product specifications or materials requirements.
- Apply parting agents or other solutions to molds.
- Engrave designs, text, or other markings onto materials, workpieces, or products.
- Build production molds.
- Clean workpieces or finished products.
- Remove workpieces from molds.
- Adjust temperature controls of ovens or other heating equipment.
- Align parts or workpieces to ensure proper assembly.
- Assemble metal or plastic parts or products.
- Load items into ovens or furnaces.
- Stack finished items for further processing or shipment.
- Fill cracks, imperfections, or holes in products or workpieces.
- Operate heating or drying equipment.
- Select production equipment according to product specifications.
- Trim excess material from workpieces.
- Cut industrial materials in preparation for fabrication or processing.
- Measure materials to mark reference points, cutting lines, or other indicators.
- Repair templates, patterns, or molds.
- Measure ingredients or substances to be used in production processes.
- Mix substances to create chemical solutions.
- Smooth metal surfaces or edges.
- Place materials into molds.
- Immerse objects or workpieces in cleaning or coating solutions.
- Measure dimensions of completed products or workpieces to verify conformance to specifications.
- Drill holes in parts, equipment, or materials.
- Draw guide lines or markings on materials or workpieces using patterns or other references.
- Adjust position of molds during processing.
- Apply lubricants or coolants to workpieces.